Ok. I will double check with Bell to see what's going on.... Just don't like to talk to their support....
Alex On Sun, 13 Jan 2008 17:02:36 -0500 "Stephan Monette" <[EMAIL PROTECTED]> wrote: > It could be the issue since it's not a standard dialable number. > > Check with Bell to set your callerid feature to the number only and not the > dialable number. This is an option in the DMS100. > > Stephan Monette, > Unlimitel inc. > P.O.Box 860 > Casselman, Ontario, K0A 1M0 > > Tel.: 1 (877) 464-6638, x221 > Fax.: (613) 482-1077 > > > -----Original Message----- > From: Alex Wang [mailto:[EMAIL PROTECTED] > Sent: Sunday, January 13, 2008 12:55 PM > To: [EMAIL PROTECTED] > Subject: Re: [on-asterisk] Caller ID problem > > > Hi Stephan > > Thanks for your help. I do have immediate=no in zaptel.conf. And I used this > in my [from-zaptel] > > [from-zaptel] > exten => _X.,1,Set(DID=${EXTEN}) > exten => _X.,n,Goto(s,1) > exten => s,1,NoOp(Entering from-zaptel with DID == ${DID}) > ; Some trunks _require_ a RINGING be sent before an Answer. > exten => s,n,Wait(10) > exten => s,n,Ringing() > .... > > > I think Wait(10) is long enough for the caller id. > > I do notice the problem usually on the long distance call. The CallerID on > my phone is showing "L1-416-xxx-xxxx" instead of "1-416-xxx-xxxx". Could the > "L" be the reason for the Caller ID issue? > > > If you still have the same issue, Bell is probably having capacity > > issue > > at the C.O. > Would you explain more detail about that? Should I give Bell a call to see > if they can do stn on their end? > > > > Thanks > > > Alex > > > > > On Sun, 13 Jan 2008 03:44:23 -0500 > Stephan Monette <[EMAIL PROTECTED]> wrote: > > > Alex, > > > > Keep in mind that callerid is sent between your first and second ring. > > So if you answer as soon as you get the first ring, you may not get > > callerid info. > > > > When you detect ringing on your FXO port, wait another 6 seconds > > before > > answering (1 ring cycle = 6 seconds) to make sure you do get your > > callerid info. > > > > If you still have the same issue, Bell is probably having capacity > > issue > > at the C.O. > > > > Good luck. > > > > Stephan Monette > > Unlimitel Inc. > > > > Tel.: 613-688-6212. x221 > > TF : 1-877-464-6638, x221 > > FAX : 613-482-1077 > > > > > > > > Alex Wang wrote: > > > Hi All > > > > > > I am using one of the FXO card from x100p.com and I have 40% chance > > > not get Caller ID on my trixbox system. Any one got same experience > > > with Bell line and x100p card? > > > > > > > > > > > > Thanks > > > > > > > > > Alex > > > > > > > > > > > > > > > > > > -------------------------------------------------------------------- > > > - > > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
