Wow that's a lot of errors.
You might want to try disabling the HWEC on your Sangoma to see is
that would help. Also is that card sharing it's interrupt with an
other peripheral (cat /etc/interrupts). Next I would check to make
sure you have latest firmware and wanpipe drivers.
Is that a new install or the problem just started?
---
Andre Courchesne - Consultant
http://www.net-forces.com
MSN: [email protected]
Skype: VoipForces
L'information contenue dans le présent document est la propriété de
Andre Courchesne. Et est divulguée en toute confidentialité. Cette
information ne doit pas être utilisée, divulguée à d'autres personnes
ou reproduite sans le consentement écrit explicite de Andre Courchesne.
The information contained in this document is confidential and
property of Andre Courchesne. It shall not be used, disclosed to
others or reproduced without the express written consent of Andre
Courchesne.
On 2009-09-30, at 10:40 PM, Martin Glazer wrote:
Hi,
Just wondering whether anyone has come across this message on a PRI
before and how they went about troubleshooting or could give some
suggestions for a solution.
We are seeing the following error message in syslog and then after a
while, Asterisk reports that the PRI is down.
Sep 30 20:35:35 pbx-firstw kernel: wanpipe1: Excessive Rx Errors ...
1619 (errs/s=8007)!
Sep 30 20:35:36 pbx-firstw kernel: wanpipe1: Excessive Rx Errors ...
1620 (errs/s=8007)!
Sep 30 20:35:37 pbx-firstw kernel: wanpipe1: Excessive Rx Errors ...
1621 (errs/s=8007)!
Sep 30 20:35:38 pbx-firstw kernel: wanpipe1: Excessive Rx Errors ...
1622 (errs/s=8007)!
Sep 30 20:35:39 pbx-firstw kernel: wanpipe1: Excessive Rx Errors ...
1623 (errs/s=8008)!
Sep 30 20:35:40 pbx-firstw kernel: wanpipe1: Excessive Rx Errors ...
1624 (errs/s=8005)!
We have had the service provider (Shaw) check and replace their
equipment.
We are using a Sangoma card if it makes any difference and the same
PRI configuration at a number of different sites, without the problem.
Thanks
Martin
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
