I am not sure if multiple lines with Dial command can be dialed at the same time but here are two other things you can do:
1- Get rid of the confirm and set your ring timeout to be just below the time when your Cell Phone Voicemail comes on. This way it will never hit your voicemail and for Fail-over you can set to start the process over and start ringing all the extensions and the Cell Phone. 2- Create a Queue where again you will set a timeout (so it never hits your cell phone voicemail) and then to restart the Queue if no one picks up within certain time. You can add any number of extensions and cell phone numbers in the queue. -Bruce > Date: Mon, 25 Oct 2010 09:43:12 -0700 > From: [email protected] > To: [email protected] > Subject: [on-asterisk] Call Hunting / Ring Group > > Hey all, > > I currently have my system setup to ring one DID out to 3 extensions and a > cell > phone... the problem I have is if the cell is off or doesnt answer, it goes > direct to the cellphones voicemail. Philip gave me a great little macro to > ensure the user presses "1" to accept the call which so far has been > flawless, > but is executed via the following: > "Dial(SIP/2001&SIP/2000&SIP/14169537...@voipms-ca2,30,riM(confirmcall))"... > my > issue now is that even my internal extensions must press 1 to confirm the > call... Is there any way to re-write the dial string over multiple lines that > get executed at the same time - then I can have my internals dial without the > attached macro confirm call? > > Thanks, > Jason
