Vou testar agora! Uma pergunta besta: alterando essas configs no dongle.conf, basta dar um *dongle reload now* no CLI?
2013/4/15 Everton Carneiro <ever...@visaotecnologia.com> > tenta comentando: > ;audio=/dev/ttyUSB2 ; tty port for audio connection; > no default value > > ;data=/dev/ttyUSB3 ; tty port for AT commands; > no default value > e coloca somente o imei > > > > 2013/4/15 Otavio Asterisk <otavioaster...@gmail.com> > >> praticamente default, alterei apenas o número da usb, e o meu imei e imsi. >> >> [general] >> >> interval=15 ; Number of seconds between trying to >> connect to devices >> >> ;------------------------------ JITTER BUFFER CONFIGURATION >> -------------------------- >> ;jbenable = yes ; Enables the use of a jitterbuffer on >> the receiving side of a >> ; Dongle channel. Defaults to "no". An >> enabled jitterbuffer will >> ; be used only if the sending side can >> create and the receiving >> ; side can not accept jitter. The Dongle >> channel can't accept jitter, >> ; thus an enabled jitterbuffer on the >> receive Dongle side will always >> ; be used if the sending side can create >> jitter. >> >> ;jbforce = no ; Forces the use of a jitterbuffer on the >> receive side of a Dongle >> ; channel. Defaults to "no". >> >> ;jbmaxsize = 200 ; Max length of the jitterbuffer in >> milliseconds. >> >> ;jbresyncthreshold = 1000 ; Jump in the frame timestamps over which >> the jitterbuffer is >> ; resynchronized. Useful to improve the >> quality of the voice, with >> ; big jumps in/broken timestamps, usually >> sent from exotic devices >> ; and programs. Defaults to 1000. >> >> ;jbimpl = fixed ; Jitterbuffer implementation, used on >> the receiving side of a Dongle >> ; channel. Two implementations are >> currently available - "fixed" >> ; (with size always equals to jbmaxsize) >> and "adaptive" (with >> ; variable size, actually the new jb of >> IAX2). Defaults to fixed. >> >> ;jbtargetextra = 40 ; This option only affects the jb when >> 'jbimpl = adaptive' is set. >> ; The option represents the number of >> milliseconds by which the new jitter buffer >> ; will pad its size. the default is 40, >> so without modification, the new >> ; jitter buffer will set its size to the >> jitter value plus 40 milliseconds. >> ; increasing this value may help if your >> network normally has low jitter, >> ; but occasionally has spikes. >> >> ;jblog = no ; Enables jitterbuffer frame logging. >> Defaults to "no". >> >> ;----------------------------------------------------------------------------------- >> >> [defaults] >> ; now you can set here any not required device settings as template >> ; sure you can overwrite in any [device] section this default values >> >> context=from-pstn ; context for incoming calls >> group=0 ; calling group >> rxgain=0 ; increase the incoming volume; may be >> negative >> txgain=0 ; increase the outgoint volume; may be >> negative >> autodeletesms=yes ; auto delete incoming sms >> resetdongle=yes ; reset dongle during initialization with >> ATZ command >> u2diag=-1 ; set ^U2DIAG parameter on device (0 = >> disable everything except modem function) ; -1 not use ^U2DIAG command >> usecallingpres=yes ; use the caller ID presentation or not >> callingpres=allowed_passed_screen ; set caller ID presentation >> by default use default network settings >> disablesms=no ; disable of SMS reading from device when >> received >> ; chan_dongle has currently a bug with >> SMS reception. When a SMS gets in during a >> ; call chan_dongle might crash. Enable >> this option to disable sms reception. >> ; default = no >> >> language=en ; set channel default language >> smsaspdu=yes ; if 'yes' send SMS in PDU mode, feature >> implementation incomplete and we strongly recommend say 'yes' >> mindtmfgap=45 ; minimal interval from end of previews >> DTMF from begining of next in ms >> mindtmfduration=80 ; minimal DTMF tone duration in ms >> mindtmfinterval=200 ; minimal interval between ends of DTMF >> of same digits in ms >> >> callwaiting=auto ; if 'yes' allow incoming calls waiting; >> by default use network settings >> ; if 'no' waiting calls just ignored >> disable=no ; OBSOLETED by initstate: if 'yes' no >> load this device and just ignore this section >> >> initstate=start ; specified initial state of device, must >> be one of 'stop' 'start' 'remote' >> ; 'remove' same as 'disable=yes' >> >> exten=+1234567890 ; exten for start incoming calls, only in >> case of Subscriber Number not available!, also set to CALLERID(ndid) >> >> dtmf=relax ; control of incoming DTMF detection, >> possible values: >> ; off - off DTMF tones detection, >> voice data passed to asterisk unaltered >> ; use this value for >> gateways or if not use DTMF for AVR or inside dialplan >> ; inband - do DTMF tones detection >> ; relax - like inband but with >> relaxdtmf option >> ; default is 'relax' by compatibility >> reason >> >> ; dongle required settings >> [dongle0] >> audio=/dev/ttyUSB2 ; tty port for audio connection; >> no default value >> data=/dev/ttyUSB3 ; tty port for AT commands; >> no default value >> >> ; or you can omit both audio and data together and use >> imei=123456789012345 and/or imsi=123456789012345 >> ; imei and imsi must contain exactly 15 digits ! >> ; imei/imsi discovery is available on Linux only >> imei=XXXXXXXXXXXXXXX >> imsi=XXXXXXXXXXXXXXX >> >> ; if audio and data set together with imei and/or imsi audio and data has >> precedence >> ; you can use both imei and imsi together in this case exact match by >> imei and imsi required >> >> >> >> >> Em 15 de abril de 2013 15:41, Everton Carneiro < >> ever...@visaotecnologia.com> escreveu: >> >> como esta o aquivo dongle.conf? >>> >>> >>> Em 15 de abril de 2013 15:36, Otavio Asterisk >>> <otavioaster...@gmail.com>escreveu: >>> >>>> Lista, boa tarde. >>>> Consegui subir o modem, consigo realizar e receber ligações, no >>>> entanto, qnd ligo através do modem, a pessoa q me atende não ouve nada, >>>> apenas um chiado e alto e um pouco da minha voz metalizada. O mesmo ocorre >>>> qnd ligo para o chip q está no modem: ouço a ura do meu pabx toda >>>> metalizada e com muito chiado de fundo. >>>> Alguém já passou por isso ou tem alguma dica? >>>> Abraço a todos! >>>> >>>> -- >>>> Otávio >>>> >>>> _______________________________________________ >>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1; >>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7; >>>> Intercomunicadores para acesso remoto via rede IP. Conheça em >>>> www.Khomp.com. >>>> _______________________________________________ >>>> DIGIVOICE Fabricante de Placas de Voz e Channel Bank >>>> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM >>>> Centro Treinamento - Curso de PABX IP - Asterisk - Site >>>> www.digivoice.com.br >>>> _______________________________________________ >>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7. >>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express. >>>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br. >>>> _______________________________________________ >>>> Para remover seu email desta lista, basta enviar um email em branco >>>> para asteriskbrasil-unsubscr...@listas.asteriskbrasil.org >>>> >>> >>> >>> >>> -- >>> *Everton Carneiro .:* >>> *Visão Tecnologia >>> * >>> *Fortaleza-CE 85-3044 8888 / 3044-8844 >>> * >>> *Cel: Tim 85-9665 0888 >>> * >>> >>> Preserve o verde, antes de imprimir veja se realmente é necessário. >>> >>> _______________________________________________ >>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1; >>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7; >>> Intercomunicadores para acesso remoto via rede IP. Conheça em >>> www.Khomp.com. >>> _______________________________________________ >>> DIGIVOICE Fabricante de Placas de Voz e Channel Bank >>> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM >>> Centro Treinamento - Curso de PABX IP - Asterisk - Site >>> www.digivoice.com.br >>> _______________________________________________ >>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7. >>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express. >>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br. >>> _______________________________________________ >>> Para remover seu email desta lista, basta enviar um email em branco para >>> asteriskbrasil-unsubscr...@listas.asteriskbrasil.org >>> >> >> >> >> -- >> Otávio >> >> _______________________________________________ >> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1; >> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7; >> Intercomunicadores para acesso remoto via rede IP. Conheça em >> www.Khomp.com. >> _______________________________________________ >> DIGIVOICE Fabricante de Placas de Voz e Channel Bank >> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM >> Centro Treinamento - Curso de PABX IP - Asterisk - Site >> www.digivoice.com.br >> _______________________________________________ >> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7. >> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express. >> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br. >> _______________________________________________ >> Para remover seu email desta lista, basta enviar um email em branco para >> asteriskbrasil-unsubscr...@listas.asteriskbrasil.org >> > > > > -- > *Everton Carneiro .:* > *Visão Tecnologia > * > *Fortaleza-CE 85-3044 8888 / 3044-8844 > * > *Cel: Tim 85-9665 0888 > * > > Preserve o verde, antes de imprimir veja se realmente é necessário. > > _______________________________________________ > KHOMP: completa linha de placas externas FXO, FXS, GSM e E1; > Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7; > Intercomunicadores para acesso remoto via rede IP. Conheça em > www.Khomp.com. > _______________________________________________ > DIGIVOICE Fabricante de Placas de Voz e Channel Bank > 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM > Centro Treinamento - Curso de PABX IP - Asterisk - Site > www.digivoice.com.br > _______________________________________________ > ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7. > Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express. > Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br. > _______________________________________________ > Para remover seu email desta lista, basta enviar um email em branco para > asteriskbrasil-unsubscr...@listas.asteriskbrasil.org > -- Otávio
_______________________________________________ KHOMP: completa linha de placas externas FXO, FXS, GSM e E1; Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7; Intercomunicadores para acesso remoto via rede IP. Conheça em www.Khomp.com. _______________________________________________ DIGIVOICE Fabricante de Placas de Voz e Channel Bank 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM Centro Treinamento - Curso de PABX IP - Asterisk - Site www.digivoice.com.br _______________________________________________ ALIGERA Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7. Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express. Channel Bank Appliance Asterisk - Acesse www.aligera.com.br. _______________________________________________ Para remover seu email desta lista, basta enviar um email em branco para asteriskbrasil-unsubscr...@listas.asteriskbrasil.org