Otávio, A parte do IMEI você esqueceu... era comentar audio e data e acrescentar imei=<imei do modem>
Sds Alexandre Alencar Twitter @alexandreitpro http://blog.alexandrealencar.net/ http://www.alexandrealencar.net/ http://www.alexandrealencar.com http://www.servicosdeti.com.br/ COBIT, ITIL, CSM, LPI, MCP-I On Mon, Apr 15, 2013 at 5:10 PM, Otavio Asterisk <otavioaster...@gmail.com>wrote: > com essa configuração no dongle.conf: > > > [dongle0] > ;audio=/dev/ttyUSB2 ; tty port for audio connection; no > default value > ;data=/dev/ttyUSB3 ; tty port for AT commands; no > default value > > ele não acha o dongle. > > sip*CLI> dongle show devices > ID Group State RSSI Mode Submode Provider Name Model > Firmware IMEI IMSI Number > dongle0 0 Not connec 0 0 0 > NONE > Unknown > > > > 2013/4/15 Everton Carneiro <ever...@visaotecnologia.com> > >> dongle unload chan_dongle.so >> dongle load chan_dongle.so >> >> >> 2013/4/15 Otavio Asterisk <otavioaster...@gmail.com> >> >>> Vou testar agora! >>> Uma pergunta besta: alterando essas configs no dongle.conf, basta dar um >>> *dongle reload now* no CLI? >>> >>> >>> 2013/4/15 Everton Carneiro <ever...@visaotecnologia.com> >>> >>>> tenta comentando: >>>> ;audio=/dev/ttyUSB2 ; tty port for audio >>>> connection; no default value >>>> >>>> ;data=/dev/ttyUSB3 ; tty port for AT >>>> commands; no default value >>>> e coloca somente o imei >>>> >>>> >>>> >>>> 2013/4/15 Otavio Asterisk <otavioaster...@gmail.com> >>>> >>>>> praticamente default, alterei apenas o número da usb, e o meu imei e >>>>> imsi. >>>>> >>>>> [general] >>>>> >>>>> interval=15 ; Number of seconds between trying to >>>>> connect to devices >>>>> >>>>> ;------------------------------ JITTER BUFFER CONFIGURATION >>>>> -------------------------- >>>>> ;jbenable = yes ; Enables the use of a jitterbuffer on >>>>> the receiving side of a >>>>> ; Dongle channel. Defaults to "no". An >>>>> enabled jitterbuffer will >>>>> ; be used only if the sending side can >>>>> create and the receiving >>>>> ; side can not accept jitter. The >>>>> Dongle channel can't accept jitter, >>>>> ; thus an enabled jitterbuffer on the >>>>> receive Dongle side will always >>>>> ; be used if the sending side can >>>>> create jitter. >>>>> >>>>> ;jbforce = no ; Forces the use of a jitterbuffer on >>>>> the receive side of a Dongle >>>>> ; channel. Defaults to "no". >>>>> >>>>> ;jbmaxsize = 200 ; Max length of the jitterbuffer in >>>>> milliseconds. >>>>> >>>>> ;jbresyncthreshold = 1000 ; Jump in the frame timestamps over >>>>> which the jitterbuffer is >>>>> ; resynchronized. Useful to improve >>>>> the quality of the voice, with >>>>> ; big jumps in/broken timestamps, >>>>> usually sent from exotic devices >>>>> ; and programs. Defaults to 1000. >>>>> >>>>> ;jbimpl = fixed ; Jitterbuffer implementation, used on >>>>> the receiving side of a Dongle >>>>> ; channel. Two implementations are >>>>> currently available - "fixed" >>>>> ; (with size always equals to >>>>> jbmaxsize) and "adaptive" (with >>>>> ; variable size, actually the new jb >>>>> of IAX2). Defaults to fixed. >>>>> >>>>> ;jbtargetextra = 40 ; This option only affects the jb when >>>>> 'jbimpl = adaptive' is set. >>>>> ; The option represents the number of >>>>> milliseconds by which the new jitter buffer >>>>> ; will pad its size. the default is >>>>> 40, so without modification, the new >>>>> ; jitter buffer will set its size to >>>>> the jitter value plus 40 milliseconds. >>>>> ; increasing this value may help if >>>>> your network normally has low jitter, >>>>> ; but occasionally has spikes. >>>>> >>>>> ;jblog = no ; Enables jitterbuffer frame logging. >>>>> Defaults to "no". >>>>> >>>>> ;----------------------------------------------------------------------------------- >>>>> >>>>> [defaults] >>>>> ; now you can set here any not required device settings as template >>>>> ; sure you can overwrite in any [device] section this default values >>>>> >>>>> context=from-pstn ; context for incoming calls >>>>> group=0 ; calling group >>>>> rxgain=0 ; increase the incoming volume; may be >>>>> negative >>>>> txgain=0 ; increase the outgoint volume; may be >>>>> negative >>>>> autodeletesms=yes ; auto delete incoming sms >>>>> resetdongle=yes ; reset dongle during initialization >>>>> with ATZ command >>>>> u2diag=-1 ; set ^U2DIAG parameter on device (0 = >>>>> disable everything except modem function) ; -1 not use ^U2DIAG command >>>>> usecallingpres=yes ; use the caller ID presentation or not >>>>> callingpres=allowed_passed_screen ; set caller ID >>>>> presentation by default use default network settings >>>>> disablesms=no ; disable of SMS reading from device >>>>> when received >>>>> ; chan_dongle has currently a bug >>>>> with SMS reception. When a SMS gets in during a >>>>> ; call chan_dongle might crash. >>>>> Enable this option to disable sms reception. >>>>> ; default = no >>>>> >>>>> language=en ; set channel default language >>>>> smsaspdu=yes ; if 'yes' send SMS in PDU mode, >>>>> feature implementation incomplete and we strongly recommend say 'yes' >>>>> mindtmfgap=45 ; minimal interval from end of >>>>> previews DTMF from begining of next in ms >>>>> mindtmfduration=80 ; minimal DTMF tone duration in ms >>>>> mindtmfinterval=200 ; minimal interval between ends of >>>>> DTMF of same digits in ms >>>>> >>>>> callwaiting=auto ; if 'yes' allow incoming calls >>>>> waiting; by default use network settings >>>>> ; if 'no' waiting calls just ignored >>>>> disable=no ; OBSOLETED by initstate: if 'yes' no >>>>> load this device and just ignore this section >>>>> >>>>> initstate=start ; specified initial state of device, >>>>> must be one of 'stop' 'start' 'remote' >>>>> ; 'remove' same as 'disable=yes' >>>>> >>>>> exten=+1234567890 ; exten for start incoming calls, only >>>>> in case of Subscriber Number not available!, also set to CALLERID(ndid) >>>>> >>>>> dtmf=relax ; control of incoming DTMF detection, >>>>> possible values: >>>>> ; off - off DTMF tones detection, >>>>> voice data passed to asterisk unaltered >>>>> ; use this value for >>>>> gateways or if not use DTMF for AVR or inside dialplan >>>>> ; inband - do DTMF tones detection >>>>> ; relax - like inband but with >>>>> relaxdtmf option >>>>> ; default is 'relax' by compatibility >>>>> reason >>>>> >>>>> ; dongle required settings >>>>> [dongle0] >>>>> audio=/dev/ttyUSB2 ; tty port for audio >>>>> connection; no default value >>>>> data=/dev/ttyUSB3 ; tty port for AT >>>>> commands; no default value >>>>> >>>>> ; or you can omit both audio and data together and use >>>>> imei=123456789012345 and/or imsi=123456789012345 >>>>> ; imei and imsi must contain exactly 15 digits ! >>>>> ; imei/imsi discovery is available on Linux only >>>>> imei=XXXXXXXXXXXXXXX >>>>> imsi=XXXXXXXXXXXXXXX >>>>> >>>>> ; if audio and data set together with imei and/or imsi audio and data >>>>> has precedence >>>>> ; you can use both imei and imsi together in this case exact match >>>>> by imei and imsi required >>>>> >>>>> >>>>> >>>>> >>>>> Em 15 de abril de 2013 15:41, Everton Carneiro < >>>>> ever...@visaotecnologia.com> escreveu: >>>>> >>>>> como esta o aquivo dongle.conf? >>>>>> >>>>>> >>>>>> Em 15 de abril de 2013 15:36, Otavio Asterisk < >>>>>> otavioaster...@gmail.com> escreveu: >>>>>> >>>>>>> Lista, boa tarde. >>>>>>> Consegui subir o modem, consigo realizar e receber ligações, no >>>>>>> entanto, qnd ligo através do modem, a pessoa q me atende não ouve nada, >>>>>>> apenas um chiado e alto e um pouco da minha voz metalizada. O mesmo >>>>>>> ocorre >>>>>>> qnd ligo para o chip q está no modem: ouço a ura do meu pabx toda >>>>>>> metalizada e com muito chiado de fundo. >>>>>>> Alguém já passou por isso ou tem alguma dica? >>>>>>> Abraço a todos! >>>>>>> >>>>>>> -- >>>>>>> Otávio >>>>>>> >>>>>>> _______________________________________________ >>>>>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1; >>>>>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7; >>>>>>> Intercomunicadores para acesso remoto via rede IP. Conheça em >>>>>>> www.Khomp.com. >>>>>>> _______________________________________________ >>>>>>> DIGIVOICE Fabricante de Placas de Voz e Channel Bank >>>>>>> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM >>>>>>> Centro Treinamento - Curso de PABX IP - Asterisk - Site >>>>>>> www.digivoice.com.br >>>>>>> _______________________________________________ >>>>>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7. >>>>>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express. >>>>>>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br. >>>>>>> _______________________________________________ >>>>>>> Para remover seu email desta lista, basta enviar um email em branco >>>>>>> para asteriskbrasil-unsubscr...@listas.asteriskbrasil.org >>>>>>> >>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> *Everton Carneiro .:* >>>>>> *Visão Tecnologia >>>>>> * >>>>>> *Fortaleza-CE 85-3044 8888 / 3044-8844 >>>>>> * >>>>>> *Cel: Tim 85-9665 0888 >>>>>> * >>>>>> >>>>>> Preserve o verde, antes de imprimir veja se realmente é necessário. >>>>>> >>>>>> _______________________________________________ >>>>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1; >>>>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7; >>>>>> Intercomunicadores para acesso remoto via rede IP. Conheça em >>>>>> www.Khomp.com. >>>>>> _______________________________________________ >>>>>> DIGIVOICE Fabricante de Placas de Voz e Channel Bank >>>>>> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM >>>>>> Centro Treinamento - Curso de PABX IP - Asterisk - Site >>>>>> www.digivoice.com.br >>>>>> _______________________________________________ >>>>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7. >>>>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express. >>>>>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br. >>>>>> _______________________________________________ >>>>>> Para remover seu email desta lista, basta enviar um email em branco >>>>>> para asteriskbrasil-unsubscr...@listas.asteriskbrasil.org >>>>>> >>>>> >>>>> >>>>> >>>>> -- >>>>> Otávio >>>>> >>>>> _______________________________________________ >>>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1; >>>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7; >>>>> Intercomunicadores para acesso remoto via rede IP. Conheça em >>>>> www.Khomp.com. >>>>> _______________________________________________ >>>>> DIGIVOICE Fabricante de Placas de Voz e Channel Bank >>>>> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM >>>>> Centro Treinamento - Curso de PABX IP - Asterisk - Site >>>>> www.digivoice.com.br >>>>> _______________________________________________ >>>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7. >>>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express. >>>>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br. >>>>> _______________________________________________ >>>>> Para remover seu email desta lista, basta enviar um email em branco >>>>> para asteriskbrasil-unsubscr...@listas.asteriskbrasil.org >>>>> >>>> >>>> >>>> >>>> -- >>>> *Everton Carneiro .:* >>>> *Visão Tecnologia >>>> * >>>> *Fortaleza-CE 85-3044 8888 / 3044-8844 >>>> * >>>> *Cel: Tim 85-9665 0888 >>>> * >>>> >>>> Preserve o verde, antes de imprimir veja se realmente é necessário. >>>> >>>> _______________________________________________ >>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1; >>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7; >>>> Intercomunicadores para acesso remoto via rede IP. Conheça em >>>> www.Khomp.com. >>>> _______________________________________________ >>>> DIGIVOICE Fabricante de Placas de Voz e Channel Bank >>>> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM >>>> Centro Treinamento - Curso de PABX IP - Asterisk - Site >>>> www.digivoice.com.br >>>> _______________________________________________ >>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7. >>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express. >>>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br. >>>> _______________________________________________ >>>> Para remover seu email desta lista, basta enviar um email em branco >>>> para asteriskbrasil-unsubscr...@listas.asteriskbrasil.org >>>> >>> >>> >>> >>> -- >>> Otávio >>> >>> _______________________________________________ >>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1; >>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7; >>> Intercomunicadores para acesso remoto via rede IP. Conheça em >>> www.Khomp.com. >>> _______________________________________________ >>> DIGIVOICE Fabricante de Placas de Voz e Channel Bank >>> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM >>> Centro Treinamento - Curso de PABX IP - Asterisk - Site >>> www.digivoice.com.br >>> _______________________________________________ >>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7. >>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express. >>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br. >>> _______________________________________________ >>> Para remover seu email desta lista, basta enviar um email em branco para >>> asteriskbrasil-unsubscr...@listas.asteriskbrasil.org >>> >> >> >> >> -- >> *Everton Carneiro .:* >> *Visão Tecnologia >> * >> *Fortaleza-CE 85-3044 8888 / 3044-8844 >> * >> *Cel: Tim 85-9665 0888 >> * >> >> Preserve o verde, antes de imprimir veja se realmente é necessário. >> >> _______________________________________________ >> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1; >> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7; >> Intercomunicadores para acesso remoto via rede IP. Conheça em >> www.Khomp.com. >> _______________________________________________ >> DIGIVOICE Fabricante de Placas de Voz e Channel Bank >> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM >> Centro Treinamento - Curso de PABX IP - Asterisk - Site >> www.digivoice.com.br >> _______________________________________________ >> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7. >> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express. >> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br. >> _______________________________________________ >> Para remover seu email desta lista, basta enviar um email em branco para >> asteriskbrasil-unsubscr...@listas.asteriskbrasil.org >> > > > > -- > Otávio > > _______________________________________________ > KHOMP: completa linha de placas externas FXO, FXS, GSM e E1; > Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7; > Intercomunicadores para acesso remoto via rede IP. Conheça em > www.Khomp.com. > _______________________________________________ > DIGIVOICE Fabricante de Placas de Voz e Channel Bank > 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM > Centro Treinamento - Curso de PABX IP - Asterisk - Site > www.digivoice.com.br > _______________________________________________ > ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7. > Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express. > Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br. > _______________________________________________ > Para remover seu email desta lista, basta enviar um email em branco para > asteriskbrasil-unsubscr...@listas.asteriskbrasil.org >
_______________________________________________ KHOMP: completa linha de placas externas FXO, FXS, GSM e E1; Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7; Intercomunicadores para acesso remoto via rede IP. Conheça em www.Khomp.com. _______________________________________________ DIGIVOICE Fabricante de Placas de Voz e Channel Bank 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM Centro Treinamento - Curso de PABX IP - Asterisk - Site www.digivoice.com.br _______________________________________________ ALIGERA Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7. Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express. Channel Bank Appliance Asterisk - Acesse www.aligera.com.br. _______________________________________________ Para remover seu email desta lista, basta enviar um email em branco para asteriskbrasil-unsubscr...@listas.asteriskbrasil.org