1NPA is the area code? (Sorry if that's a stupid question; I'm a newbie at this).
It won't work for me to 10 digit dial (i.e. 18085551212) because the way our area code is split if you dial the area code the telco tries to connect you to a neighbor island, rather than the local island. When I try to 7 digit dial I get "Cause: Invalid number format (28)" in the PRI Debug. I wonder if I have something misconfigured in the CHAN_DAHDI.CONF file? -B- From: [email protected] [mailto:[email protected]] On Behalf Of Andrew M. Lauppe Sent: Wednesday, October 07, 2009 12:43 PM To: AsteriskNOW Discussion Subject: Re: [asterisknow] Can dial long distance but not local? I've actually seen that before on an XO ISDN-PRI. I fixed it by having asterisk add the 1NPA to the front (i.e. dial(dahdi/g1/1313${EXTEN}) ) It wasn't an elegant solution but it worked. For some reason the PRI didn't like the 7 digit dialing. <http://www.anteil.com> ________________________________ Andrew M. Lauppe Consultant 4051B Executive Park Dr. Harrisburg, PA 17111 ________________________________ +1 (877) OS-LINUX x23 +1 (484) 421-9919 direct Ben Schorr wrote: I posted this to AsteriskUsers but then I noticed that there is a specific AsteriskNow list and perhaps this message is more appropriate here. My apologies if you already saw it on the other list.... *********** AsteriskNOW 1.4.26.2 with a Digium TE205P connected to an ISDN PRI (single span). I'm sure I just have something goofed up in the dialplans? I have a bunch of Polycom 331 IP phones connecting to the server. I can dial the other extensions in the system fine and I can dial long distance outgoing but cannot seem to get it to dial local (7 digit) calls. I see this in the CLI: -- Executing [...@macro-dialout-trunk:19] Dial("SIP/801-09b6e498", "DAHDI/g1/5551212|300|") in new stack -- Requested transfer capability: 0x00 - SPEECH -- Called g1/5551212 -- Channel 0/1, span 1 got hangup, cause 28 -- Hungup 'DAHDI/1-1' == Everyone is busy/congested at this time (1:0/0/1) -- Executing [...@macro-dialout-trunk:20] Goto("SIP/801-09b6e498", "s-CHANUNAVAIL|1") in new stack -- Goto (macro-dialout-trunk,s-CHANUNAVAIL,1) -- Executing [s-chanunav...@macro-dialout-trunk:1] GotoIf("SIP/801-09b6e498", "1?noreport") in new stack -- Goto (macro-dialout-trunk,s-CHANUNAVAIL,3) -- Executing [s-chanunav...@macro-dialout-trunk:3] NoOp("SIP/801-09b6e498", "TRUNK Dial failed due to CHANUNAVAIL (hangupcause: 2 - failing through to other trunks") in new stack Also when I check the PRI DEBUG I see an Error 28 which indicates an invalid number format. But I'm just sending 5551212, which should be o.k. I'm a newbie at this...any suggestions welcomed. -Ben- ________________________________ _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisknow mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisknow
<<image001.jpg>>
<<image002.gif>>
_______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisknow mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisknow
