On 4 Feb 2011, at 14:55, Dave Higton wrote:
>>> PBX in a Flash Purple Edition runs 1.8 with feepbx
>>
>> Well, it "runs" in a tight run-crash-restart loop:
>>
>> /usr/bin/safe_asterisk: line 145: 11917 Segmentation fault
>> (core dumped) nice -n $PRIORITY ${ASTBINDIR}/asterisk -f
>> ${CLIARGS} ${ASTARGS} > /dev/${TTY} 2>&1 < /dev/${TTY}
>> Asterisk ended with exit status 139
>> Asterisk ended on signal 11.
>> Automatically restarting Asterisk.
>>
>> (plus or minus the odd typo)
>>
>> I have changed /etc/sysconfig/network-scripts/ifcfg-eth0 to
>> fixed IP address (there is no DHCP on the LAN segment it has
>> to live on), I've added netmask, DNS1, DNS2 and gateway, and
>> changed the name from pbx.local to asterisk1.eu.nice.com;
>> other than that I've left it alone.
>
> I should add that this was a text-mode installation. I'm not sure that
> anyone has tested this; of course it fails, because there is no option to
> configure the important basic parameters (like network settings) during
> installation, there isn't a DHCP server on the LAN segment that it has to be
> on, therefore it can't get an IP address, therefore it can't do the net-based
> part of its installation...
>
> Nor is there any option to set the NTP server, nor is there any option to
> configure sendmail... it hung for a /long/ time on boot-up while configuring
> sendmail (while failing to configure it, really)...
>
> Does the installation process assume that users will do a graphical
> installation?
>
> Dave
>
I wonder if it puts an IP address in the asterisk config at install time - and
is crashing because it isn't there ?
T.
Tim Panton - Web/VoIP consultant and implementor
www.westhawk.co.uk
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisknow mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisknow
