Dear Asterisk,
Im using four port card ,when i give pri show spans it
gives
PRI span 1/0: Down, Active
PRI span 2/0: In Alarm, Down, Active
PRI span 3/0: In Alarm, Down, Active
PRI span 4/0: In Alarm, Down, Active
Ater that i've given pri intense debug span 1 it gives below messges on cli
PRI Span: 1 t200_expire
PRI Span: 1 TEI: 0 State 5(Awaiting establishment)
PRI Span: 1 V(A)=0, V(S)=0, V(R)=0
PRI Span: 1 K=7, RC=0, l3_initiated=1, reject_except=0, ack_pend=0
PRI Span: 1 T200_id=8192, N200=3, T203_id=0
PRI Span: 1 TEI=0 Sending SABME
PRI Span: 1
PRI Span: 1 > TEI: 0 State 5(Awaiting establishment)
PRI Span: 1 > V(A)=0, V(S)=0, V(R)=0
PRI Span: 1 > K=7, RC=1, l3_initiated=1, reject_except=0, ack_pend=0
PRI Span: 1 > T200_id=0, N200=3, T203_id=0
PRI Span: 1 > [ 00 01 7f ]
PRI Span: 1 > Unnumbered frame:
PRI Span: 1 > SAPI: 00 C/R: 0 EA: 0
PRI Span: 1 > TEI: 000 EA: 1
PRI Span: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous
balanced mode extended) ]
PRI Span: 1 > 0 bytes of data
PRI Span: 1 -- Starting T200 timer
PRI Span: 1 t200_expire
PRI Span: 1 TEI: 0 State 5(Awaiting establishment)
PRI Span: 1 V(A)=0, V(S)=0, V(R)=0
PRI Span: 1 K=7, RC=1, l3_initiated=1, reject_except=0, ack_pend=0
PRI Span: 1 T200_id=8192, N200=3, T203_id=0
PRI Span: 1 TEI=0 Sending SABME
PRI Span: 1
PRI Span: 1 > TEI: 0 State 5(Awaiting establishment)
PRI Span: 1 > V(A)=0, V(S)=0, V(R)=0
PRI Span: 1 > K=7, RC=2, l3_initiated=1, reject_except=0, ack_pend=0
PRI Span: 1 > T200_id=0, N200=3, T203_id=0
PRI Span: 1 > [ 00 01 7f ]
PRI Span: 1 > Unnumbered frame:
PRI Span: 1 > SAPI: 00 C/R: 0 EA: 0
PRI Span: 1 > TEI: 000 EA: 1
PRI Span: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous
balanced mode extended) ]
PRI Span: 1 > 0 bytes of data
PRI Span: 1 -- Starting T200 timer
PRI Span: 1 t200_expire
PRI Span: 1 TEI: 0 State 5(Awaiting establishment)
PRI Span: 1 V(A)=0, V(S)=0, V(R)=0
PRI Span: 1 K=7, RC=2, l3_initiated=1, reject_except=0, ack_pend=0
PRI Span: 1 T200_id=8192, N200=3, T203_id=0
PRI Span: 1 TEI=0 Sending SABME
PRI Span: 1
PRI Span: 1 > TEI: 0 State 5(Awaiting establishment)
PRI Span: 1 > V(A)=0, V(S)=0, V(R)=0
PRI Span: 1 > K=7, RC=3, l3_initiated=1, reject_except=0, ack_pend=0
PRI Span: 1 > T200_id=0, N200=3, T203_id=0
PRI Span: 1 > [ 00 01 7f ]
PRI Span: 1 > Unnumbered frame:
PRI Span: 1 > SAPI: 00 C/R: 0 EA: 0
PRI Span: 1 > TEI: 000 EA: 1
PRI Span: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous
balanced mode extended) ]
PRI Span: 1 > 0 bytes of data
PRI Span: 1 -- Starting T200 timer
PRI Span: 1 t200_expire
PRI Span: 1 TEI: 0 State 5(Awaiting establishment)
PRI Span: 1 V(A)=0, V(S)=0, V(R)=0
PRI Span: 1 K=7, RC=3, l3_initiated=1, reject_except=0, ack_pend=0
PRI Span: 1 T200_id=8192, N200=3, T203_id=0
PRI Span: 1 SAPI/TEI=0/0 Starting link restart delay timer
PRI Span: 1 TEI=0 MDL-ERROR (G): T200 expired N200 times sending SABME in
state 5(Awaiting establishment)
PRI Span: 1 Changing from state 5(Awaiting establishment) to 4(TEI assigned)
PRI Span: 1 TEI=0 DL event: Q931_DL_EVENT_DL_RELEASE_IND(3)
what could be the reason for pri show spans always shows down?
Thank you.
--
Regards,
Kalyan
.
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisknow mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisknow
