Hi Kalyan Are you using digium or sangoma card. what is the output of dahdi show status. also post the file /etc/dahdi/system.conf
Best Regards V.Ragunath On 21 May 2014 22:30, <[email protected]> wrote: > Send asterisknow mailing list submissions to > [email protected] > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.digium.com/mailman/listinfo/asterisknow > or, via email, send a message with subject or body 'help' to > [email protected] > > You can reach the person managing the list at > [email protected] > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of asterisknow digest..." > > > Today's Topics: > > 1. Proble with Asterisk (Kalyan kumar Pendker) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Wed, 21 May 2014 20:02:03 +0530 > From: Kalyan kumar Pendker <[email protected]> > To: [email protected] > Subject: [asterisknow] Proble with Asterisk > Message-ID: > <CAJROi6RqokmeKbuD5iMeBUwm= > [email protected]> > Content-Type: text/plain; charset="iso-8859-1" > > Dear Asterisk, > > Im using four port card ,when i give pri show spans it > gives > PRI span 1/0: Down, Active > PRI span 2/0: In Alarm, Down, Active > PRI span 3/0: In Alarm, Down, Active > PRI span 4/0: In Alarm, Down, Active > > Ater that i've given pri intense debug span 1 it gives below messges on > cli > > > PRI Span: 1 t200_expire > PRI Span: 1 TEI: 0 State 5(Awaiting establishment) > PRI Span: 1 V(A)=0, V(S)=0, V(R)=0 > PRI Span: 1 K=7, RC=0, l3_initiated=1, reject_except=0, ack_pend=0 > PRI Span: 1 T200_id=8192, N200=3, T203_id=0 > PRI Span: 1 TEI=0 Sending SABME > PRI Span: 1 > PRI Span: 1 > TEI: 0 State 5(Awaiting establishment) > PRI Span: 1 > V(A)=0, V(S)=0, V(R)=0 > PRI Span: 1 > K=7, RC=1, l3_initiated=1, reject_except=0, ack_pend=0 > PRI Span: 1 > T200_id=0, N200=3, T203_id=0 > PRI Span: 1 > [ 00 01 7f ] > PRI Span: 1 > Unnumbered frame: > PRI Span: 1 > SAPI: 00 C/R: 0 EA: 0 > PRI Span: 1 > TEI: 000 EA: 1 > PRI Span: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous > balanced mode extended) ] > PRI Span: 1 > 0 bytes of data > PRI Span: 1 -- Starting T200 timer > PRI Span: 1 t200_expire > PRI Span: 1 TEI: 0 State 5(Awaiting establishment) > PRI Span: 1 V(A)=0, V(S)=0, V(R)=0 > PRI Span: 1 K=7, RC=1, l3_initiated=1, reject_except=0, ack_pend=0 > PRI Span: 1 T200_id=8192, N200=3, T203_id=0 > PRI Span: 1 TEI=0 Sending SABME > PRI Span: 1 > PRI Span: 1 > TEI: 0 State 5(Awaiting establishment) > PRI Span: 1 > V(A)=0, V(S)=0, V(R)=0 > PRI Span: 1 > K=7, RC=2, l3_initiated=1, reject_except=0, ack_pend=0 > PRI Span: 1 > T200_id=0, N200=3, T203_id=0 > PRI Span: 1 > [ 00 01 7f ] > PRI Span: 1 > Unnumbered frame: > PRI Span: 1 > SAPI: 00 C/R: 0 EA: 0 > PRI Span: 1 > TEI: 000 EA: 1 > PRI Span: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous > balanced mode extended) ] > PRI Span: 1 > 0 bytes of data > PRI Span: 1 -- Starting T200 timer > PRI Span: 1 t200_expire > PRI Span: 1 TEI: 0 State 5(Awaiting establishment) > PRI Span: 1 V(A)=0, V(S)=0, V(R)=0 > PRI Span: 1 K=7, RC=2, l3_initiated=1, reject_except=0, ack_pend=0 > PRI Span: 1 T200_id=8192, N200=3, T203_id=0 > PRI Span: 1 TEI=0 Sending SABME > PRI Span: 1 > PRI Span: 1 > TEI: 0 State 5(Awaiting establishment) > PRI Span: 1 > V(A)=0, V(S)=0, V(R)=0 > PRI Span: 1 > K=7, RC=3, l3_initiated=1, reject_except=0, ack_pend=0 > PRI Span: 1 > T200_id=0, N200=3, T203_id=0 > PRI Span: 1 > [ 00 01 7f ] > PRI Span: 1 > Unnumbered frame: > PRI Span: 1 > SAPI: 00 C/R: 0 EA: 0 > PRI Span: 1 > TEI: 000 EA: 1 > PRI Span: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous > balanced mode extended) ] > PRI Span: 1 > 0 bytes of data > PRI Span: 1 -- Starting T200 timer > PRI Span: 1 t200_expire > PRI Span: 1 TEI: 0 State 5(Awaiting establishment) > PRI Span: 1 V(A)=0, V(S)=0, V(R)=0 > PRI Span: 1 K=7, RC=3, l3_initiated=1, reject_except=0, ack_pend=0 > PRI Span: 1 T200_id=8192, N200=3, T203_id=0 > PRI Span: 1 SAPI/TEI=0/0 Starting link restart delay timer > PRI Span: 1 TEI=0 MDL-ERROR (G): T200 expired N200 times sending SABME in > state 5(Awaiting establishment) > PRI Span: 1 Changing from state 5(Awaiting establishment) to 4(TEI > assigned) > PRI Span: 1 TEI=0 DL event: Q931_DL_EVENT_DL_RELEASE_IND(3) > > > > what could be the reason for pri show spans always shows down? > > Thank you. > -- > Regards, > > Kalyan > . > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: < > http://lists.digium.com/pipermail/asterisknow/attachments/20140521/1f479f0a/attachment-0001.html > > > > ------------------------------ > > _______________________________________________ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisknow mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisknow > > End of asterisknow Digest, Vol 60, Issue 1 > ****************************************** >
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisknow mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisknow
