Yep, it looks like it works with Sip. The problem seems to be a nasty interaction between the 2 ports.
I set up something I call a parrot, which records what I say and then plays it back. That sounds ok when I test it. It's only when your call actually comes in the T1 (via sip or IAX) and then goes out the ZAP channels that you have the problem. -- Brian On Mon, 2006-02-20 at 08:29 -0600, Nathan C. Smith wrote: > I have a similar configuration. I haven't had time to test the zap channels > yet, but with wanrouter running I can make and receive a sip -> IAX call > with no issues. > > Soekris+Astlinux continues to amaze. > > -Nate > > -----Original Message----- > From: Brian [mailto:[EMAIL PROTECTED] > Sent: Monday, February 20, 2006 8:16 AM > To: Discussion of AstLinux - Asterisk on Compact Flash > Subject: [Astlinux-users] Anyone else using the Sangoma drivers in Astlinux? > > > After fighting a problem with horrible distortion on calls for a week I > finally managed to set up a small lab environment to rule out QoS issues. > > Setup: > astlinux w/ 2 port Sangom card A102. > port 1 is a T1 to the internet > port 2 is a PRI to the phone system > > Problem: > When a call is established with an outside person (doesn't matter who makes > the call in or out) the remote person's side of the conversation is VERY > broken up. It sounds like bad packet loss. > > > I was able to easily recreate this scenario with the following setup: > > TEST AaH w/ pri -> port2 of Sangoma (AStlinux) > > AStlinux port 1 T1 -> a 3com t1 router > > T1 router on my Lan -> MY AaH > > I set up an IAX2 channel between them. > > When I place a call between the 2 PBXs I hear the bad sound from MY AaH, > even when I'm just listening to my voice mail. > > So I remove the T1 from the equation and change the EXTIF on the AStlinux > box so it has a local address on my LAN. I adjust the host entry in the > iax.conf file on My AaH and can make calls again. > > With this new set up, calls sound very clear... > > > I'm speculating that there's a problem with the wanpipe-beta1-2.3.4 drivers > in the distro. Does anyone else have a similar setup with the sangoma cards? > > -- > Brian > > _______________________________________________ > Astlinux-users mailing list [email protected] > http://lists.kriscompanies.com/mailman/listinfo/astlinux-users > > Donations to support AstLinux are graciously accepted via PayPal to > [EMAIL PROTECTED] > _______________________________________________ > Astlinux-users mailing list > [email protected] > http://lists.kriscompanies.com/mailman/listinfo/astlinux-users > > Donations to support AstLinux are graciously accepted via PayPal to [EMAIL > PROTECTED] > > _______________________________________________ Astlinux-users mailing list [email protected] http://lists.kriscompanies.com/mailman/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]
