[EMAIL PROTECTED] wrote:
> Hi list!
>
> I eventually managed to boot the AstLinux-0.3.0-sc1100.img on my
> soekris-based box.
> However, I do have problems using a USB stick as the keydisk.
>
> I tried to insert before and after boot time, in each of the two slots.
> Genkd does not seem to be happy.
>
> No USB module is listed by lsmod.
>
> For each of these commands:
> # modprobe usbcore
> # modprobe usb-storage
> # modprobe usb-ohci
> # modprobe ehci-hcd
> # modprobe usb-uhci
> I got the message :
> modprobe: module xxxxxx not found.
> modprobe: failed to loade module xxxxxx
>
> cat /proc/partitions only shows hdc (the CF is recognized by the BIOS
> as a secondary master).
>
> Did any of you encounter such an issue?
>
> Regards,
>
> Pierre
>
Pierre,
In AstLinux all of the USB support is built into the kernel. That is
why your modprobe commands are failing. You should, however, see
something about /dev/sda in your kernel log messages. Try this:
fdisk -l /dev/sda
What Soekris do you have that uses /dev/hdc for the CF and has two USB
ports?
--
Kristian Kielhofner
_______________________________________________
Astlinux-users mailing list
[email protected]
http://lists.kriscompanies.com/mailman/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to [EMAIL
PROTECTED]
