Kevin: Thanks.
That wasn't exactly what I was asking for, but it turns out it was most of the answer. I didn't realize the serial console was defined in GRUB. A quick edit (after re-learning vi) and all of my problems were fixed. Thanks again, Kevin. Robert On May 9, 2006, at 8:29 PM, Kevin Kiely wrote: > Robert, > > Kris had responded to a post earlier concerning a similar situation > regarding the editing of the grub.conf file. To get the wrap board to > reboot with the reboot command you will also have to make the > modifications mentioned below as well as the ones you are looking for. > I'll copy it in here for you. > > Kevin > > > > mount -o rw,remount / > vi /boot/grub/grub.conf > add reboot=bios to the end of each kernel line (after astopt=, root=, > etc) > :wq (save and quit) > mount -o ro,remount / > reboot (pull power :) > > Once the system has booted back up, you should be able > to reboot the > system with the "reboot" command. > > -----Original Message----- > From: Robert J. Lawrence [mailto:[EMAIL PROTECTED] > Sent: Tuesday, May 09, 2006 8:43 PM > To: Discussion of AstLinux - Asterisk on Compact Flash > Subject: [Astlinux-users] WRAP and AstLinux 0.4.0 > > First, I want to say -- WOW!!!! > > I just booted AstLinux (on a 1GB CF) on my brand new WRAP 1.E and I > am amazed with the speed of the board and how little resources are > being used with AstLinux. WOW! Kris (an all of those that have > helped him) has done a fantastic job. > > As somewhat of a newbie, I have a few questions basic questions. > > 1.) It seems the WRAP BIOS defaults to 38400 for the serial port > speed but after stage 1.5 of GRUB, it switches to 19200. The BIOS > only supports setting it at 9600, 38400, or 57600. How do I change > GRUB and Linux to use 38400 to match the initial BIOS settings? > > 2.) How do I tell GRUB to default to the keydisk being /dev/hda3, as > the WRAB has no USB port? > > Thanks, > > Robert > _______________________________________________ > Astlinux-users mailing list > [email protected] > http://lists.kriscompanies.com/mailman/listinfo/astlinux-users > > Donations to support AstLinux are graciously accepted via PayPal to > [EMAIL PROTECTED] > > > _______________________________________________ > Astlinux-users mailing list > [email protected] > http://lists.kriscompanies.com/mailman/listinfo/astlinux-users > > Donations to support AstLinux are graciously accepted via PayPal to > [EMAIL PROTECTED] _______________________________________________ Astlinux-users mailing list [email protected] http://lists.kriscompanies.com/mailman/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]
