Kevin Kiely wrote:
> Robert,
>
> Kris had responded to a post earlier concerning a similar situation
> regarding the editing of the grub.conf file. To get the wrap board to
> reboot with the reboot command you will also have to make the
> modifications mentioned below as well as the ones you are looking for.
> I'll copy it in here for you.
>
> Kevin
>
>
>
> mount -o rw,remount /
> vi /boot/grub/grub.conf
> add reboot=bios to the end of each kernel line (after astopt=, root=,
> etc)
> :wq (save and quit)
> mount -o ro,remount /
> reboot (pull power :)
>
> Once the system has booted back up, you should be able
> to reboot the
> system with the "reboot" command.
>
Also, to change the console speed you will need to change all instances
of 19200 to 38400 in the following files:
/boot/grub/grub.conf
/etc/inittab
In later versions of AstLinux I will be making separate images for the
Soekris and WRAP boards. It will be a lot easier with the new build
system :).
--
Kristian Kielhofner
_______________________________________________
Astlinux-users mailing list
[email protected]
http://lists.kriscompanies.com/mailman/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to [EMAIL
PROTECTED]
