Speaking of updates, is there any way of doing an in-place update/upgrade. For example, I have a WRAP board, every time there is an upgrade. I have to physically get to the box, get out the screwdriver, nut driver and remove the board to get access to the CF card. As I'm sure others have a similar setup, any recommendations are appreciated.
Thanks, Kevin -----Original Message----- From: Kristian Kielhofner [mailto:[EMAIL PROTECTED] Sent: Friday, May 12, 2006 10:15 AM To: Discussion of AstLinux - Asterisk on Compact Flash Subject: Re: [Astlinux-users] 0.4.0 astup Darrick Hartman wrote: > Graham S. Jarvis wrote: > >>Hello All, >> >>Can someone tell me why astup needs to update so many files just after a new install????? >> > > Don't do it! I don't believe that astup is not ready to be used with > 0.4.0. Kristian, please confirm this. > > Darrick > Darrick, %100 correct. For now, I will update the AstLinux rsync repos for AstLinux 0.4, but I have a new sollution in the works for upgrades. Stay tuned for more on that. -- Kristian Kielhofner _______________________________________________ Astlinux-users mailing list [email protected] http://lists.kriscompanies.com/mailman/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED] _______________________________________________ Astlinux-users mailing list [email protected] http://lists.kriscompanies.com/mailman/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]
