listas iPfone wrote:
> Hi!
>
> I have a brand new Gumstix here to install astlinux....maybe somebody can
> explain the procedure to install? or provide some link?
>
> Thanks
>
> Miklos
>
Miklos,
The default config works perfectly for a 400xm. If you have a 200xm,
you will need to run make menuconfig and (de)select:
AstLinux Target Device -> Gumstix -> Basix-Connex -> 400mhz
That will configure AstLinux for your 200mhz cpu.
If you don't have an "xm" model, you will need to drastically reduce
the number of package targets - they have 4mb of flash as opposed to the
xm, which has 16mb.
Grab yourself a copy of trunk:
svn co https://svn.sourceforge.net/svnroot/astlinux/trunk astlinux-trunk
cp gumstix.config .config
make oldconfig
make menuconfig (make your changes)
make
make jffs2root
You will need to flash the gumstix using these instructions:
http://docwiki.gumstix.org/Replacing_the_filesystem_image
I flash my 'stix using TFTP and upgrade u-boot over serial.
Let me know if you have any problems.
--
Kristian Kielhofner
_______________________________________________
Astlinux-users mailing list
[email protected]
http://lists.kriscompanies.com/mailman/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to [EMAIL
PROTECTED]
