hi,

concerning DOMs:

just recently i bought a 128 MB PQI DOM (DH0128M88RF1)
which is incredibly quick and inexpensive - AstLinux runs
like a charm off it.
it's an "industrial strength" 44-pin flash module.
at least here in GER it's around 23 euros incl. postal charges.
a 1 GB PQI DOM would cost around affordable 50 euros.

the 1 GB (M-Systems) DOC however, is a completely different
story: a 1 GB DOC (MD2203-D1024) is around 545 euros.
...before tax and without postal charges, i might add.
i don't know what makes it so expensive, especially since the MTBF
is as high as the MTBF for the PQI module (1000000 h).

by the by...
i too have installed the kd on /dev/hda2.
sure.. this would make upgrading tricky... but then again:
why would i want to upgrade a (smoothly) running system? ;-)

cheers,
Harry
[...]
> If you are shooting for the ultimate in long life, consider 
> using a "Disk on
> Chip" or maybe a "Disk on Module" ... I think that these are 
> typically rated
> to have a much longer duty cycle than the CF cards ... But 
> they are QUITE
> expensive ... I have a 1gb "Disk on Module" in one of my 
> machines that set
> me back more than $450 ... So I would not opt for this unless 
> you have a
> really good reason ...
[...]
> G.Hendershot





 
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of 
> Erick Perez
> Sent: Saturday, September 30, 2006 10:38 PM
> To: [EMAIL PROTECTED]
> Subject: [Astlinux-users] Compiling latest stable asterisk 
> release 1.2.14and
> zaptel tools
> 
> hi, I am planning to compile latest asterisk release. I want 
> to know any
> caveats or special needs in order to do so.
> The whole point of this is that i want to use the tiny 
> astlinux in a CF but
> with latest asterisk. I have no need to use the graphical 
> system to manage
> asterisk or the whole idea of having a single .conf file for 
> asterisk. I
> simply want to run latest asterisk but continue to this small 
> and reliable
> distribution.
> 
> Kris, do you do that for a fee or is something that can be done by us?
> 
> Also, what is the practical (real life scenarios) duration of 
> a CF card in
> read only mode and voicemail being recorded to a second 
> partition in the CF
> OR voicemail being recorded to a usb disk?
> 
> Thanks,
[...]

_______________________________________________
Astlinux-users mailing list
[email protected]
http://lists.kriscompanies.com/mailman/listinfo/astlinux-users

Donations to support AstLinux are graciously accepted via PayPal to [EMAIL 
PROTECTED]

Reply via email to