On Oct 24, 2006, at 12:11 AM, Darrick Hartman wrote:
Maybe for Polycoms, buy my Linksys SPA-942's work with NTPBROADCAST not set, the default. My SPA-942's time sync by doing nothing more than setting the AstLinux IP address in the SPA-942's NTP server setting. Maybe a good rule, if the IP Phone interface requires an NTP server IP address, then NTPBROADCAST=no (AstLinux default) should be fine, but if there is no NTP time server setting then try NTPBROADCAST=yes as the phone may use "listen mode" to NTP broadcasts. NTPBROADCAST=yes would also probably require the phone to be in the same subnet as the AstLinux box. Lonnie |
_______________________________________________ Astlinux-users mailing list [email protected] http://lists.kriscompanies.com/mailman/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]
