IS wrote:
>>Darrick,
>>
>> I will investigate any potential zaptel problems with 2.6.19.
>>
>> 2.6.19 seems to be the way to go. I will point out that a workaround
>>does exist in 2.6.18. Just add:
>>
>>"idle=poll"
>>
>>to the kernel command line and that will keep the SC1100 from going to
>>sleep and stopping the TSC counter. It will, however, use more power
>>and generate more heat. Using the 27mhz hrt makes more sense, but if we
>>can't, there is a way to make the TSC work properly.
>>
>> Hopefully I will have some time in the next few days to look into this.
>
>
> Kristian,
>
> as I mentioned in my several posts regarding this issue, I managed to
> compile Astlinux with kernel 2.6.19 and patched zaptel 1.2.10, patched
> dnsmasq and patched iptables. It is working fine. However, Digium should
> update Zaptel, maintainers of the other packages should update their stuff
> too. And I am sure they will! Once this is done, 2.6.19 is no issue.
>
> If you have any questions regarding my work, please let me know.
>
> regards,
>
> Ingmar
Ingmar,
This was the first time since I left the US that I have had time to
access my e-mail and I couldn't go through entire threads, so I
responded to the first one :).
Thanks for your work!
--
Kristian Kielhofner
_______________________________________________
Astlinux-users mailing list
[email protected]
http://lists.kriscompanies.com/mailman/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to [EMAIL
PROTECTED]
