I'm getting further through the build now. But still errors... can you
advise how to deal with the following...
make[1]: Entering directory `/home/user/astlinux-trunk
/build_i586/wanpipe-3.2.3'
+--------- Wanpipe Build Info --------------+
Compiling Wanpipe with ZAPTEL Support!
Zaptel Dir: /home/user/astlinux-trunk/build_i586/zaptel-1.4.10/kernel
touch: cannot touch `/etc/wanpipe/.zaphdlc': No such file or directory
Zaptel HW HDLC support detected
Please recompile and reinstall ZAPTEL after installation
+-------------------------------------------+
Done
./Setup drivers
--builddir=/home/user/astlinux-trunk/build_i586/wanpipe-3.2.3/ast_build_dir
--with-linux=/home/user/astlinux-trunk/build_i586/linux-2.6.20.21-astlinux
--zaptel-path=/home/user/astlinux-trunk/build_i586/zaptel-1.4.10/kernel
--usr-cc=/home/user/astlinux-trunk/build_i586/staging_dir/bin/i586-linux-uclibc-gcc
--protocol=DEF-TDM --no-zaptel-compile --noautostart --arch=i386 --silent
./Setup: 945: Syntax error: Bad substitution
make[1]: *** [all_bin_kmod] Error 2
make[1]: Leaving directory
`/home/user/astlinux-trunk/build_i586/wanpipe-3.2.3'
make: *** [/home/user/astlinux-trunk/build_i586/wanpipe-3.2.3/.built] Error
2
Thanks
David
On Fri, Apr 11, 2008 at 11:45 PM, Darrick Hartman (lists) <
[EMAIL PROTECTED]> wrote:
> Guy Neale wrote:
> > Sorry, I shouldn't really say "The dev dudes haven't yet added a
> > checksum file to their web site" as I don't really know this for sure.
> > The problem is a script is trying to download
> > "http://files.astlinux.org/zaptel-1.4.10.tar.gz.sha1"; to verify the
> > previously downloaded
> > http://downloads.digium.com/pub/zaptel/releases/zaptel-1.4.10.tar.gz
> > file. The script has stopped due to ERROR 404: Not Found. (no such URL).
> > This is not normally a big problem if you "make" again, I've found that
> > the make scripts normally check and continue from where they left off
> > Hope this helps
>
> Guy,
>
> You're very close. We do maintain a mirror of all current files (in the
> default configuration) and their sha1sum files at files.astlinux.org.
> We also had not updated the sha1sum files after upgrading to zaptel
> 1.4.10. I'm in the process of resolving that right now.
>
> What you could do is manually verify that the file had downloaded
> properly, then do sha1sum dl/<filename> > dl/<filename>.sha1. After
> that, you can, in most cases, type make again to resume the build.
>
> We probably should set the getter script to check for an sha1 file at
> the original download site too and not just on files.astlinux.org. In
> this case, Digium does have an sha1sum file (this isn't always true for
> all files in the system)
>
> Darrick
>
> > ________________________________________
> > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED] On Behalf Of Guy
> > Neale
> > Sent: Saturday, 12 April 2008 12:28 PM
> > To: [EMAIL PROTECTED]; AstLinux Users Mailing List
> > Subject: Re: [Astlinux-users] Build error
> >
> > The dev dudes haven't yet added a checksum file to their web site which
> > verifies the integrity of the package you are downloading
> > (zaptel-1.4.10.tar.gz)
> >
> > Shouldn't be a big problem just "make" again and you should continue to
> > compile
> >
> > Guy
> >
> > ________________________________________
> > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED] On Behalf Of David
> > Kerr
> > Sent: Saturday, 12 April 2008 12:08 PM
> > To: [email protected]
> > Subject: [Astlinux-users] Build error
> >
> > As I mentioned in my last email, I've checked out the trunk and compiled
> > AstLinux. But I don't know if it was completely successful. The last
> > messages coming from the build (after 90 minutes) suggest an error....
> >
> > # ln -sf /usr/lib/pppd/2.4.3
> > /home/user/astlinux-trunk/build_i586/root/usr/lib/ppp
> > toolchain/getter_script.sh -P /home/user/astlinux-trunk/dl
> > http://downloads.digium.com/pub/zaptel/releases/zaptel-1.4.10.tar.gz
> > 15:00:06
> > URL:http://downloads.digium.com/pub/zaptel/releases/zaptel-1.4.10.tar.gz
> > [1670752/1670752] -> "/home/user/astlinux-trunk/dl/zaptel-1.4.10.tar.gz"
> > [1]
> > http://files.astlinux.org/zaptel-1.4.10.tar.gz.sha1:
> > 15:00:10 ERROR 404: Not Found.
> > sha1sum: dl/zaptel-1.4.10.tar.gz.sha1: No such file or directory
> > zaptel-1.4.10.tar.gz failed verification - exiting
> > make: *** [/home/user/astlinux-trunk/dl/zaptel-1.4.10.tar.gz] Error 1
> >
> >
> > And then I return to command prompt.
> > Is the above message OK or do I have a problem ?
> >
> > Thanks for any help.
> >
> > David
>
> --
> Darrick Hartman
> DJH Solutions, LLC
> http://www.djhsolutions.com
> http://www.djhsolutions.com/wiki
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by the 2008 JavaOne(SM) Conference
> Don't miss this year's exciting event. There's still time to save $100.
> Use priority code J8TL2D2.
>
> http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone
> _______________________________________________
> Astlinux-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/astlinux-users
>
> Donations to support AstLinux are graciously accepted via PayPal to
> [EMAIL PROTECTED]
>
>
>
-------------------------------------------------------------------------
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference
Don't miss this year's exciting event. There's still time to save $100.
Use priority code J8TL2D2.
http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone
_______________________________________________
Astlinux-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to [EMAIL
PROTECTED]
