No problem. Looks like everything will work once you get the zaptel.conf and zapata.conf files configured properly. The fxs modules are green. Do you have green or red modules?
Clara Chan wrote: > My zaptel.conf consists of two lines > > loadzone=au > fxoks=1-2 > > as I am using a TDM410P with 2 fxs modules in ports 1 and 2. > > I initiated the ztcfg -vv command again and received the following > error > > Zaptel Version: 1.4.10.1 > Echo Canceller: MG2 > Configuration > ====================== > > > Channel map: > > Channel 01: FXO Kewlstart (Default) (Slaves: 01) > Channel 02: FXO Kewlstart (Default) (Slaves: 02) > > 2 channels to configure. > > Changing signalling on channel 1 from Unused to FXO Kewlstart > ZT_CHANCONFIG failed on channel 1: Invalid argument (22) > Did you forget that FXS interfaces are configured with FXO signalling > and that FXO interfaces use FXS signalling? > > The LEDs for the two activated ports on the Digium card is now lit. > Will look into configuring zapata.conf > > Thanks heaps, Darrick. -- Darrick Hartman DJH Solutions, LLC http://www.djhsolutions.com http://www.djhsolutions.com/wiki ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]