hello, I use net5501 to test Alix 2c2, i can see the screen message using 19200 bit rate, but most of times, the message is unreadable.I have some problems here: 1) when i start mISDN scan to detect openvox BRI cards, it asks me install xsltproc not in path, please install. in centos, i try to use yum,but no command found. 2) regarding the this part: ------------------------------------ Create a new partition to use for writable storage. The recommended method for a single CF install is to use UnionFS as documented on here http://www.astlinux.org/node/30 . Alternatively, you can use a unionfs overlay and the historical 'key disk'. If you don't use a key disk, the same file structure is created on the UnionFS partition. ------------------------------------- I can come to here in your doc,
p (for primary) X (where X is the partition number usually 2 in a single CF system) initially, in my system, there is a part 2 when I first time install the system. because i use one single CF card, I have to delete the part 2 and recreate part 2. after then, i saved with w command and reboot, genunion /dev/hda2. some commands are not executable? I am not sure the step i took is correct or not? 3) how to I access GUI(192.168.2.XXX) for asterisk-GUI? please give me a hint! thanks! zhu --- On Wed, 2/18/09, Darrick Hartman <dhart...@djhsolutions.com> wrote: > From: Darrick Hartman <dhart...@djhsolutions.com> > Subject: Re: [Astlinux-users] loading runnix.img astlinux ->stop! > To: da...@kerr.net > Cc: zhulizhon...@yahoo.com.cn, "AstLinux Users Mailing List" > <astlinux-users@lists.sourceforge.net> > Date: Wednesday, February 18, 2009, 11:51 PM > The latest 0.6 images I build include a wrap version and a > generic-serial version. I'll be making them available > for testing later > today. > > Darrick > > David Kerr wrote: > > I use the net5501 images on an Alix board. This is the > best one to use > > and sends console to the serial port. > > > > If you build your own image from source then you can > select to build > > either net5501 or generic with serial console enabled. > Personally I > > have opted to build generic because then I can have a > single image > > that I can test in vmware prior to installing on the > Alix board. > > > > David > > > > On 2/18/09, lizhong zhu > <zhulizhon...@yahoo.com.cn> wrote: > >> hello, Darrick: > >> I think it should be a serial console problem. i > use PC pcengines Alix 2c2 > >> board. can i use net5501 version for my board? > >> thanks! > >> zhulizhong > >> > >> > >> --- On Wed, 2/18/09, Darrick Hartman > <dhart...@djhsolutions.com> wrote: > >> > >>> From: Darrick Hartman > <dhart...@djhsolutions.com> > >>> Subject: Re: [Astlinux-users] loading > runnix.img astlinux ->stop! > >>> To: zhulizhon...@yahoo.com.cn, "AstLinux > Users Mailing List" > >>> <astlinux-users@lists.sourceforge.net> > >>> Date: Wednesday, February 18, 2009, 9:00 PM > >>> Use the net5501 image. The image you selected > does not have > >>> serial output. Everything is probably > running, but you > >>> don't get a serial console. > >>> > >>> lizhong zhu wrote: > >>>> hello, all of users: > >>>> I used physdiskwrite to copy the img file > into CF > >>> card(4GB) > >>>> I installed astlinux-0.6.2-geni586.img.gz > version > >>> with PC pcengines 2c2 board.the system stops > to somewhere > >>> and show this: > >>>> ----------------------------------- > >>>> loading runnix.img astlinux ready > >> > >> > >> > >> > ------------------------------------------------------------------------------ > >> Open Source Business Conference (OSBC), March > 24-25, 2009, San Francisco, CA > >> -OSBC tackles the biggest issue in open source: > Open Sourcing the Enterprise > >> -Strategies to boost innovation and cut costs with > open source participation > >> -Receive a $600 discount off the registration fee > with the source code: SFAD > >> http://p.sf.net/sfu/XcvMzF8H > >> _______________________________________________ > >> Astlinux-users mailing list > >> Astlinux-users@lists.sourceforge.net > >> > https://lists.sourceforge.net/lists/listinfo/astlinux-users > >> > >> Donations to support AstLinux are graciously > accepted via PayPal to > >> pay...@krisk.org. > >> > >> > > ------------------------------------------------------------------------------ Open Source Business Conference (OSBC), March 24-25, 2009, San Francisco, CA -OSBC tackles the biggest issue in open source: Open Sourcing the Enterprise -Strategies to boost innovation and cut costs with open source participation -Receive a $600 discount off the registration fee with the source code: SFAD http://p.sf.net/sfu/XcvMzF8H _______________________________________________ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to pay...@krisk.org.
