Hey,
Yes, but only for UDP 5060, as this is the port that Asterisk is
listening on. I have 5090 configured for the ATA, but didn't enable it
in sip-voip.conf, figuring it's just being (supposedly) passed thru and
NAT'd.
Should I enable it for this port too or disable the plug-in altogether?
I'll try both now just to test.
-James
Philip A. Prindeville wrote:
Have you enabled /etc/arno-iptables-firewall/plugins/sip-voip.conf ?
On 01/24/2010 01:11 PM, James Babiak wrote:
Hey Everyone,
I'm running into a weird issue, and hopefully someone can assist me in
finding out what's going on.
I'm running Astlinux 0.7 on a box serving as my router, asterisk box and
openvpn server (and a few other things) and I've run into a seemingly
very unusual issue. I have an ATA setup behind my Astlinux box that is
remotely connecting to a fax server at work running freeswitch. It will
be using t.38 and connecting directly to this server, completely
bypassing my Astlinux box (outside of it serving as a router+nat). It
registers fine, and can make and receive calls. The issue occurs when
the rtp is being setup. I discovered the problem because I couldn't get
faxes to work at all, even though everyone else had no problem. Even
other people behind a similar setup (though not running this version of
Astlinux). I noticed in my nat table that my rtp was going from the ATA
to 19.226.0.0. Very very unusual. So I started running tcpdump on both
eth0 and eth1 (wan and lan respectively). It seems like something in my
astlinux box is modifying the contents of the sip packets and changing
the rtp IP addresses. Everything from the server on eth0 looks perfect,
as does everything from the ATA on eth1. But when I look at eth1 from
the server, the rtp address is being set to 19.226.0.0. And when I look
at eth0 from the ATA, my rtp address is being set to 10.200.143.207.
The specific SIP packet capture in question here from the egress
interfaces: (with some slight IP/hostname/phone number obfuscations to
protect the innocent ;) )
--==--
15:23:38.985020 IP (tos 0x68, ttl 249, id 9380, offset 0, flags [none],
proto: UDP (17), length: 726) my.public.address.5090 >
remote.server.address.5060: SIP, length: 698
SIP/2.0 200 OK
To: James Babiak FAX
<sip:fax_xx...@remote.server.address>;tag=63e72d1726ec8327o0
From: <sip:5551...@remote.server.address>;tag=0aDa2FSmFDScc
Call-ID: f12527d7-85e8c...@172.20.0.145
CSeq: 126063973 INVITE
Via: SIP/2.0/UDP remote.server.address;branch=z9hG4bKKeXpa1my0UF0r
Contact: James Babiak FAX <sip:fax_xx...@remote.server.address:5090>
Server: Linksys/SPA3102-5.1.10(GW)
Content-Length: 269
Content-Type: application/sdp
v=0
o=- 128599 128599 IN IP4 10.200.143.207
s=-
c=IN IP4 10.200.143.207
t=0 0
m=image 16434 udptl t38
a=T38FaxVersion:0
a=T38MaxBitRate:14400
a=T38FaxRateManagement:transferredTCF
a=T38FaxMaxBuffer:200
a=T38FaxMaxDatagram:200
a=T38FaxUdpEC:t38UDPRedundancy
--==--
and
--==--
15:19:24.575373 IP (tos 0x20, ttl 50, id 57433, offset 0, flags [none],
proto: UDP (17), length: 1084) remote.server.address.5060 >
SipuraSPA.routed.com.5090: SIP, length: 1056
INVITE sip:fax_xx...@172.20.0.145:5090 SIP/2.0
Via: SIP/2.0/UDP 38.101.17.105;rport;branch=z9hG4bKFarK3mHgcrpNa
Max-Forwards: 70
From: <sip:xx...@remote.server.address>;tag=e416y1XHNr42g
To: James Babiak FAX
<sip:fax_xx...@remote.server.address>;tag=74f688c7b624f7dao0
Call-ID: 91cd090b-14d4d...@172.20.0.145
CSeq: 126063846 INVITE
Contact: <sip:5551...@remote.server.address:5060;transport=udp>
User-Agent: Star2Star Media
Allow: INVITE, ACK, BYE, CANCEL, OPTIONS, MESSAGE, UPDATE, INFO,
REGISTER, REFER, NOTIFY, PUBLISH, SUBSCRIBE
Supported: timer, precondition, path, replaces
Session-Expires: 120;refresher=uac
Min-SE: 120
Content-Type: application/sdp
Content-Disposition: session
Content-Length: 316
X-FS-Support: update_display
v=0
o=Sonus_UAC 2924581275921585578 5556846930163024566 IN IP4
19.226.0.0
s=SIP Media Capabilities
c=IN IP4 19.226.0.0
t=0 0
m=image 11692 udptl t38
a=T38FaxVersion:0
a=T38MaxBitRate:14400
a=T38FaxRateManagement:transferredTCF
a=T38FaxMaxBuffer:262
a=T38FaxMaxDatagram:176
a=T38FaxUdpEC:t38UDPRedundancy
--==--
But like I said, the corresponding packets on the ingress interface does
not reflect those above IP addresses. They have the proper ones. So
something internal is changing them. I've spent hours trying to find
some firewall rule/setting I needed to change, and even went so far as
to disable everything that wasn't 'standard', but nothing works. I've
tried changing SIP ports for the ATA, setting up port forwarding, etc.
etc., but still no go. The remote freeswitch side seems to be ignoring
my invalid IP, since the ATA still receives inbound audio, just no
outbound audio.
Everything else, IP's included, in the SIP packets are fine. It only
breaks after the call is setup.
Any ideas?
Thanks
-James
------------------------------------------------------------------------------
Throughout its 18-year history, RSA Conference consistently attracts the
world's best and brightest in the field, creating opportunities for Conference
attendees to learn about information security's most important issues through
interactions with peers, luminaries and emerging and established companies.
http://p.sf.net/sfu/rsaconf-dev2dev
_______________________________________________
Astlinux-users mailing list
Astlinux-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to pay...@krisk.org.
|
