This tread is getting a bit confused in the layout.... (Some new entries written above and some below the last text).
Anyway, I'm running this on a test system so I already took Michael's advice and installed astlinux-1.0.3 - Asterisk 1.8.11.1 All the Best, -Graham- Lonnie Abelbeck wrote, On 18.06.2012 21:03: > On Jun 18, 2012, at 1:18 PM, Graham S. Jarvis wrote: > >> Any way of stopping it from appearing? >> >> -Graham- >> >> >> Michael Keuter wrote on 18/06/12 19:59: >>> PRI because DAHDI relies on >>> LibPRI and handles BRI ports like PRI spans. >>> >>> Sent from my iPad >>> >>> Michael >>> >>> Am 18.06.2012 um 19:46 schrieb "Graham S. Jarvis"<gsjar...@pt.lu>: >>> >>>> Thanks Michael! >>>> >>>> Dahdi show status is now showing all 4 spans. >>>> I only have one ISDN line here so only one "Alarm - OK" >>>> All calls (there are various msn's) are being seen. >>>> (didn't yet build the dialplan). >>>> >>>> Any idea what this means: >>>> [Jun 18 19:39:04] NOTICE[372]: chan_dahdi.c:3099 >>>> my_handle_dchan_exception: PRI >>>> got event: HDLC Abort (6) on D-channel of span 1 >>>> >>>> I'm getting it repeated on span 1 about every 37 seconds. >>>> (why "PRI" ???) > Graham, > > Michael is the ISDN expert here, but possibly this is an Asterisk 1.4 issue. > > Personally, if I were going from AstLinux 0.4.4 to AstLinux 1.0.3 I'd also > move to Asterisk 1.8 . > > Lonnie > > PS: Should you want to move from AstLinux 1.0.3-Asterisk-1.4.44 to AstLinux > 1.0.3-Asterisk-1.8.11.1, you have to play a little trick since the upgrade > script is based on the "1.0.3" version only. > > The trick is to upgrade to a non-1.0.3 version first then you can upgrade to > AstLinux 1.0.3-Asterisk-1.8.11.1 . You can use the > http://build.astlinux.org/ site, click [ Cache ], (login with default > AstLinux credentials), leave every option unchanged except uncheck "SMP > Kernel" to match your old board. The click { Show AstLinux Image } and > follow the "CLI procedure to upgrade AstLinux", if all goes well reboot. > After the reboot, from the web interface, [ Prefs ] tab make sure the > "Repository URL" shows (for Asterisk 1.8): > > Repository URL: http://mirror.astlinux.org/ast18-firmware-1.x > > Then go to the [ System ] tab to "System Firmware Upgrade" to upgrade to > AstLinux 1.0.3-Asterisk-1.8.11.1 if you desire. > > > > ------------------------------------------------------------------------------ > Live Security Virtual Conference > Exclusive live event will cover all the ways today's security and > threat landscape has changed and how IT managers can respond. Discussions > will include endpoint security, mobile security and the latest in malware > threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ > _______________________________________________ > Astlinux-users mailing list > Astlinux-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/astlinux-users > > Donations to support AstLinux are graciously accepted via PayPal to > pay...@krisk.org. ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to pay...@krisk.org.
