Hello all!
(Not really an Astlinux problem)
Does anyone have a working TDM400P with at least one FXO?
Could you send me the config files?
I have
# lspci
00:00.0 Host bridge: Cyrix Corporation PCI Master
00:06.0 Ethernet controller: National Semiconductor Corporation DP83815
(MacPhyter) Ethernet Controller
00:07.0 Ethernet controller: National Semiconductor Corporation DP83815
(MacPhyter) Ethernet Controller
00:08.0 Ethernet controller: National Semiconductor Corporation DP83815
(MacPhyter) Ethernet Controller
00:0a.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN
interface
00:12.0 ISA bridge: National Semiconductor Corporation SC1100 Bridge
00:12.1 Bridge: National Semiconductor Corporation SC1100 SMI & ACPI
00:12.2 IDE interface: National Semiconductor Corporation SCx200, SC1100 IDE
controller (rev 01)
00:12.5 Bridge: National Semiconductor Corporation SC1100 XBus
00:13.0 USB Controller: Compaq Computer Corporation ZFMicro Chipset USB (rev 08)
(It's a Net4801)
# lsmod
Module Size Used by
xt_tcpudp 2496 36
ipt_MASQUERADE 2448 2
nf_nat_ftp 2160 0
iptable_nat 4328 1
nf_nat 15616 3 ipt_MASQUERADE,nf_nat_ftp,iptable_nat
nf_conntrack_ipv4 11596 17 iptable_nat,nf_nat
xt_TCPMSS 3424 3
ipt_LOG 4608 28
ipt_REJECT 2416 0
iptable_mangle 2320 0
xt_multiport 2480 0
xt_state 1696 13
xt_limit 1824 31
xt_conntrack 3152 1
nf_conntrack_ftp 6288 1 nf_nat_ftp
nf_conntrack 55868 8
ipt_MASQUERADE,nf_nat_ftp,iptable_nat,nf_nat,nf_conntrack_ipv4,xt_state,xt_conntrack,nf_conntrack_ftp
iptable_filter 2288 1
ip_tables 9472 3 iptable_nat,iptable_mangle,iptable_filter
x_tables 12820 11
xt_tcpudp,ipt_MASQUERADE,iptable_nat,xt_TCPMSS,ipt_LOG,ipt_REJECT,xt_multiport,xt_state,xt_limit,xt_conntrack,ip_tables
pc87360 15256 0
hwmon_vid 2304 1 pc87360
hwmon 2228 1 pc87360
dahdi_echocan_mg2 5032 1
wctdm 35492 1
dahdi 188040 6 dahdi_echocan_mg2,wctdm
natsemi 22360 0
rtc 9372 0
leds_net48xx 1828 0
scx200_gpio 3076 1 leds_net48xx
nsc_gpio 2576 1 scx200_gpio
CLI> dahdi show status
Description Alarms IRQ bpviol CRC4
Wildcard TDM400P REV E/F Board 5 OK 0 0 0
CLI> dahdi show channels
Chan Extension Context Language MOH Interpret
pseudo default default
4 c_from-pstn default
But I also have:
CLI> reload chan_dahdi.so
-- Reloading module 'chan_dahdi.so' (DAHDI Telephony w/PRI)
== Parsing '/etc/asterisk/chan_dahdi.conf': Found
[Jun 29 11:27:24] WARNING[6470]: chan_dahdi.c:13140 process_dahdi: Ignoring any
changes to 'rxwink' (on reload)
[Jun 29 11:27:24] WARNING[6470]: chan_dahdi.c:13140 process_dahdi: Ignoring any
changes to 'signalling' (on reload)
[Jun 29 11:27:24] WARNING[6470]: chan_dahdi.c:13140 process_dahdi: Ignoring any
changes to 'dsi' (on reload)
[Jun 29 11:27:24] WARNING[6470]: chan_dahdi.c:4386 handle_alarms: Detected
alarm
on channel 4: Red Alarm
-- Reconfigured channel 4, FXS Kewlstart signalling
== Parsing '/etc/asterisk/users.conf': Found
4801_gw*CLI> dahdi restart
Destroying channels and reloading DAHDI configuration.
== Unregistered channel -2
== Unregistered channel 4
== Parsing '/etc/asterisk/chan_dahdi.conf': Found
[Jun 29 11:27:39] WARNING[6470]: chan_dahdi.c:1313 dahdi_open: Unable to
specify
channel 4: Device or resource busy
[Jun 29 11:27:39] WARNING[6470]: chan_dahdi.c:1313 dahdi_open: Unable to
specify
channel 4: Device or resource busy
[Jun 29 11:27:39] WARNING[6470]: chan_dahdi.c:1313 dahdi_open: Unable to
specify
channel 4: Device or resource busy
[Jun 29 11:27:39] WARNING[6470]: chan_dahdi.c:1313 dahdi_open: Unable to
specify
channel 4: Device or resource busy
[Jun 29 11:27:39] WARNING[6470]: chan_dahdi.c:1313 dahdi_open: Unable to
specify
channel 4: Device or resource busy
[Jun 29 11:27:39] WARNING[6470]: chan_dahdi.c:1313 dahdi_open: Unable to
specify
channel 4: Device or resource busy
[Jun 29 11:27:39] WARNING[6470]: chan_dahdi.c:1313 dahdi_open: Unable to
specify
channel 4: Device or resource busy
[Jun 29 11:27:39] WARNING[6470]: chan_dahdi.c:1313 dahdi_open: Unable to
specify
channel 4: Device or resource busy
[Jun 29 11:27:39] WARNING[6470]: chan_dahdi.c:1313 dahdi_open: Unable to
specify
channel 4: Device or resource busy
[Jun 29 11:27:39] WARNING[6470]: chan_dahdi.c:1313 dahdi_open: Unable to
specify
channel 4: Device or resource busy
[Jun 29 11:27:39] WARNING[6470]: chan_dahdi.c:1313 dahdi_open: Unable to
specify
channel 4: Device or resource busy
[Jun 29 11:27:39] WARNING[6470]: chan_dahdi.c:1313 dahdi_open: Unable to
specify
channel 4: Device or resource busy
[Jun 29 11:27:39] WARNING[6470]: chan_dahdi.c:4386 handle_alarms: Detected
alarm
on channel 4: Red Alarm
-- Reconfigured channel 4, FXS Kewlstart signalling
-- Automatically generated pseudo channel
== Parsing '/etc/asterisk/users.conf': Found
# cat /proc/dahdi/*
Span 1: WCTDM/4 "Wildcard TDM400P REV E/F Board 5" (MASTER)
1 WCTDM/4/0 Reserved
2 WCTDM/4/1 Reserved
3 WCTDM/4/2 Reserved
4 WCTDM/4/3 FXSKS (In use) RED(SWEC: MG2)
and there's nothing plugged in.
When I plug a phone line in then the line is permanently busy for incoming and
outgoing calls.
I've tried reversing the polarity of the cable - no difference.
I was hoping that someone would have config files from a working system so I
could see if the FXO is damaged.
Many thanks in advance!
-Graham-
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________
Astlinux-users mailing list
Astlinux-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to
pay...@krisk.org.
