Ionel, I assume you are using: -- SENSEMODS="w83627ehf coretemp" -- (only space is before coretemp)
that should work. I'm not sure why this doesn't work: -- WDMODULE="iTCO_wdt" -- Though your Debian example is Linux Kernel "3.3.0-rc7-d2700-1", possibly tweaked for your board. AstLinux currently uses Linux 2.6.35 . Worst case you can use WDMODULE="softdog", or not enable the watchdog at all. I have yet to have an Atom board lock-up on me. Lonnie On Jun 30, 2012, at 5:14 PM, Ionel Chila wrote: > Interesting. If I load them manually I get the stuff bellow: > Is this right? and why won't they load from my /mnt/kd/rc.conf.d/user.conf > > HOME-PBX ~ #modprobe w83627ehf > > HOME-PBX ~ #modeprobe coretemp > > HOME-PBX ~ # sensors > > w83627dhg-isa-0290 > Adapter: ISA adapter > Vcore: +1.22 V (min = +0.00 V, max = +1.74 V) > in1: +1.02 V (min = +0.64 V, max = +0.00 V) ALARM > AVCC: +3.34 V (min = +0.08 V, max = +1.18 V) ALARM > +3.3V: +3.34 V (min = +0.42 V, max = +3.01 V) ALARM > in4: +1.02 V (min = +1.54 V, max = +1.97 V) ALARM > in5: +1.51 V (min = +0.59 V, max = +1.74 V) > in6: +1.00 V (min = +0.63 V, max = +1.36 V) > 3VSB: +3.33 V (min = +2.24 V, max = +3.63 V) > Vbat: +3.22 V (min = +1.50 V, max = +2.34 V) ALARM > fan1: 3245 RPM (min = 2636 RPM, div = 32) > fan2: 0 RPM (min = 5273 RPM, div = 64) ALARM > fan3: 0 RPM (min = 502 RPM, div = 64) ALARM > fan4: 0 RPM (min = 181 RPM, div = 64) ALARM > fan5: 0 RPM (min = 1004 RPM, div = 64) ALARM > temp1: +61.0 C (high = +43.0 C, hyst = +3.0 C) ALARM sensor = CPU > diode > temp2: +110.5 C (high = +80.0 C, hyst = +75.0 C) ALARM sensor = CPU > diode > temp3: +52.5 C (high = +80.0 C, hyst = +75.0 C) sensor = CPU diode > cpu0_vid: +2.050 V > > coretemp-isa-0000 > Adapter: ISA adapter > Core 0: +62.0 C (crit = +100.0 C) > > coretemp-isa-0002 > Adapter: ISA adapter > Core 1: +62.0 C (crit = +100.0 C) > > > > > From: Ionel Chila <ionelch...@yahoo.com> > To: Lonnie Abelbeck <li...@lonnie.abelbeck.com>; AstLinux Users Mailing List > <astlinux-users@lists.sourceforge.net> > Sent: Saturday, June 30, 2012 5:03 PM > Subject: Re: [Astlinux-users] Jetway NF99FL-525 Dual Core Atom > > Just tried those setting and I get nothing. The watchdog won't load anything. > > iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 > iTCO_wdt: No card detected > > > Looking at a debian system dmesg with the same board it loads the following: > > coretemp coretemp.0: Unable to read TjMax from CPU 0 > coretemp coretemp.0: Unable to read TjMax from CPU 2 > w83627ehf: Found W83627DHG-P chip at 0x290 > iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07 > iTCO_wdt: Found a NM10 TCO device (Version=2, TCOBASE=0x0460) > iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) > > http://openbenchmarking.org/system/1205021-BY-1203163AR22/D2700MUD/dmesg > > > > From: Lonnie Abelbeck <li...@lonnie.abelbeck.com> > To: AstLinux Users Mailing List <astlinux-users@lists.sourceforge.net> > Cc: Ionel Chila <ionelch...@yahoo.com> > Sent: Saturday, June 30, 2012 3:19 PM > Subject: Re: [Astlinux-users] Jetway NF99FL-525 Dual Core Atom > > Hi Ionel, > > I have never tested the Intel D2700MUD board, it seems that uses the Intel > NM10 chipset. > > I'd suggest doing some goggling. I'd try SENSEMODS ="coretemp" and > WDMODULE="iTCO_wdt" to start with, with /mnt/kd/sensors.conf copied from > "/stat/etc/sensors.conf.default" to start with. > > It's faster to simply "modprobe" the module from the CLI and see it it loads. > > If you get a useful combination, please report your results. That is a > common chipset. > > Lonnie > > > > On Jun 30, 2012, at 3:00 PM, Ionel Chila wrote: > > > Hey Lonnie, thanks for sharing. Remember my setup I posted not too long > > ago. I was wondering what my "wdmodule " "sensemods" in > > /mnt/kd/rc.conf.d/user.conf and /mnt/kd/sensors.conf settings should be for > > my "D2700MUD MINI-ITX ATOM" board. > > > > Thanks much as always :) > > > > > > > > My existing setup still running strong: > > > > - Casetronic Travla C138 Mini-ITX case black > > ---> > > http://www.amazon.com/gp/product/B001KZ1H2E/ref=oh_o00_s00_i00_details > > > > - INTEL RETAIL D2700MUD MINI-ITX ATOM INTEGRATED > > > > > > ---> http://www.amazon.com/gp/product/B00797U2ZA/ref=oh_o02_s00_i00_details > > > > - Kingston ValueRAM 4GB 1066MHz DDR3 Non-ECC Notebook Memory > > ---> > > http://www.amazon.com/gp/product/B001PYDKWU/ref=oh_o01_s00_i00_details > > > > - Patriot Torqx 2 64GB SSD > > ---> > > http://www.amazon.com/Patriot-Memory-Torqx-2-5-Inch-PT264GS25SSDR/dp/B004XVN1TO/ref=sr_1_1? > > s=electronics&ie=UTF8&qid=1330291923&sr=1-1 > > > > - TDM410P V2 for Digium Asterisk PBX > > > > > > ---> > > http://www.ebay.com/itm/TDM400P-TDM410P-V2-for-Digium-Asterisk-PBX-1FXO-3-FXS-Echo-Cancellation-Socket/170773174342?ssPageName=WDVW&rd=1&ih=007&category=11908&cmd=ViewItem#ht_2125wt_972 > > > > > > > > > > From: Lonnie Abelbeck <li...@lonnie.abelbeck.com> > > To: AstLinux Users Mailing List <astlinux-users@lists.sourceforge.net> > > Sent: Saturday, June 30, 2012 2:15 PM > > Subject: [Astlinux-users] Jetway NF99FL-525 Dual Core Atom > > > > Hi, > > > > We added a new reference system to the AstLinux WiKi: > > > > Jetway NF99FL-525 Dual Core Atom > > http://doc.astlinux.org/userdoc:board_jetway_nf99fl-525 > > > > In addition to the previous reference system: > > > > Jetway NF96FL-525 Dual Core Atom > > http://doc.astlinux.org/userdoc:board_jetway_nf96fl-525 > > > > > > The NF99FL-525 vs NF96FL-525 Pros: > > > > 1) 2x Intel PCI-e (82574L) Gb NIC's on motherboard. Use VLAN's for > > multiple internal interfaces/networks with a switch. > > > > 2) Runs cooler than the Jetway '96 board with daughter board ('99 w/o > > daughter board), and uses slightly less power 20W vs 23W. Most likely the > > '99 could be run without a fan in some cases. > > > > > > The NF99FL-525 vs NF96FL-525 Cons: > > > > 1) Currently there is no hardware watchdog support. Though > > WDMODULE="softdog" works. The Intel "iTCO_wdt" module does not work with > > this board and the current AstLinux Linux 2.6.35 kernel does not support > > the watchdog on the Fintek chip. The Jetway '96 board supports the Intel > > "iTCO_wdt" module. > > > > 2) No legacy IDE interface. > > > > > > In my iperf tests: > > > > The '99 will route at Gb line speed (928 Mbps) at 77% idle (via top). > > > > The '96 will route at "near" Gb line speed (810 Mbps) at 73% idle (via top). > > > > Other users' comments and experiences are always welcomed. > > > > Lonnie > > > > PS: Disclaimer, in no way is the AstLinux Team guaranteeing the above > > reference hardware, we simply have tested the hardware with AstLinux and it > > appears to work as expected. > > > > > > ------------------------------------------------------------------------------ > > Live Security Virtual Conference > > Exclusive live event will cover all the ways today's security and > > threat landscape has changed and how IT managers can respond. Discussions > > will include endpoint security, mobile security and the latest in malware > > threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ > > _______________________________________________ > > Astlinux-users mailing list > > Astlinux-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/astlinux-users > > > > Donations to support AstLinux are graciously accepted via PayPal to > > pay...@krisk.org. > > > > > > > > > ------------------------------------------------------------------------------ > Live Security Virtual Conference > Exclusive live event will cover all the ways today's security and > threat landscape has changed and how IT managers can respond. Discussions > will include endpoint security, mobile security and the latest in malware > threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ > _______________________________________________ > Astlinux-users mailing list > Astlinux-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/astlinux-users > > Donations to support AstLinux are graciously accepted via PayPal to > pay...@krisk.org. > ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to pay...@krisk.org.
