Hi Lonnie,


sorry I forgot it is npt really astlinux but a simple debian with Asterisk 
1.8.8.2.

The command "acl show" doesn't exist, there is no acl.conf on the device.



But I have a astlinux machine here running with Asterisk 1.8.32.3 where the 
problem doesn't exist and also there is no acl.conf file and the command "acl 
show" doesn't exist.



I have one suspect: ON astlinux machine there is a setting called "domain" in 
network tab. This setting was set to the IP address of the machine itself. 
Perhaps this setting is the solution. Can you tell me where this setting is 
stored in which file?



[cid:[email protected]]











Best regards



Stefan Ulm

Technical Department | Research & Development

[email protected]











DIVUS Headquarters Pillhof 51 . I-39057 Eppan (Südtirol) . Tel. +39 0471 633 
662 . Fax. +39 0471 631 829

www.divus.eu . Privacy: http://www.divus.eu/media/DivusPrivacy.pdf





-----Ursprüngliche Nachricht-----
Von: Lonnie Abelbeck [mailto:[email protected]]
Gesendet: Montag, 6. Juni 2016 14:27
An: AstLinux Users Mailing List <[email protected]>
Betreff: Re: [Astlinux-users] "Wrong password" on registration from outside



Stefan,



This sounds like an Asterisk question, rather then AstLinux per. se., but 
possible we can get you on the right path.



What version of Asterisk ? I'll assume 11.x



What is the generated syslog error/warning ? Something like

--

Forbidden - wrong password on authentication for REGISTER for '%s' to '%s'

--



Do you have any "Named ACLs" defined via acl.conf ?  From the Asterisk CLI "acl 
show" if any issue a "acl show <name>" for entries.



I'm not certain, but an ACL failure could generate a Forbidden 403 your are 
describing.



Lonnie





On Jun 6, 2016, at 5:19 AM, Stefan Ulm 
<[email protected]<mailto:[email protected]>> wrote:



> Hi all,

>

> when I register in local Wifi there is no problem, but when I register to 
> same astlinux server with same registration credentials from outside (port 
> forwarding is working) I get registration error "bad auth" and in asterisk 
> cli I see "wron password". I re-checked many times, password is correct. 
> Local I use the Ip address of the astlinux server for registration, while for 
> registration from outside I use external IP address.

> I read in some forums, that when accessing from outside there can be a 
> problem with checksum of credentials but I couldn't fix it so far.

>

> Do you have any advice for me to solve the problem?

>

> Best regards

>

> Stefan Ulm

> Technical Department | Research & Development 
> [email protected]<mailto:[email protected]>





------------------------------------------------------------------------------

What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic 
patterns at an interface-level. Reveals which users, apps, and protocols are 
consuming the most bandwidth. Provides multi-vendor support for NetFlow, 
J-Flow, sFlow and other flows. Make informed decisions using capacity planning 
reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e

_______________________________________________

Astlinux-users mailing list

[email protected]<mailto:[email protected]>

https://lists.sourceforge.net/lists/listinfo/astlinux-users



Donations to support AstLinux are graciously accepted via PayPal to 
[email protected]<mailto:[email protected]>.
------------------------------------------------------------------------------
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are 
consuming the most bandwidth. Provides multi-vendor support for NetFlow, 
J-Flow, sFlow and other flows. Make informed decisions using capacity 
planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e
_______________________________________________
Astlinux-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/astlinux-users

Donations to support AstLinux are graciously accepted via PayPal to 
[email protected].

Reply via email to