> Am 19.04.2018 um 01:23 schrieb Michael Knill > <michael.kn...@ipcsolutions.com.au>: > > Hi Group > > Just wondering if its possible to manually define an address from the OVPN IP > Address Pool for a specific device. > I want to do this to prevent it from changing e.g. I will be pointing an > Asterisk SIP Peer to it. > > Regards > Michael Knill
Hi Michael, that can be done easily: - Create a client file in the /mnt/kd/openvpn/ccd/ directory named like the profile name for the device. - It then shows up on the WebGUI under "OpenVPN Client Configs". - Add e.g. "ifconfig-push 10.8.122.82 255.255.255.0" to that file, and - add "client-config-dir /etc/openvpn/ccd" to the "Raw Commands" in the OpenVPN server section. Michael http://www.mksolutions.info ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to pay...@krisk.org.
