Thanks Michael
Regards
Michael Knill
On 19/4/18, 5:57 pm, "Michael Keuter" <[email protected]> wrote:
> Am 19.04.2018 um 01:23 schrieb Michael Knill
<[email protected]>:
>
> Hi Group
>
> Just wondering if its possible to manually define an address from the
OVPN IP Address Pool for a specific device.
> I want to do this to prevent it from changing e.g. I will be pointing an
Asterisk SIP Peer to it.
>
> Regards
> Michael Knill
Hi Michael,
that can be done easily:
- Create a client file in the /mnt/kd/openvpn/ccd/ directory named like the
profile name for the device.
- It then shows up on the WebGUI under "OpenVPN Client Configs".
- Add e.g. "ifconfig-push 10.8.122.82 255.255.255.0" to that file, and
- add "client-config-dir /etc/openvpn/ccd" to the "Raw Commands" in the
OpenVPN server section.
Michael
http://www.mksolutions.info
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Astlinux-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to
[email protected].
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Astlinux-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to
[email protected].
