Problem solved – thanks Michael 👍
Your suggestion that by using SSH via WinSCP to re-start lighttpd by inputting
*/service lighttpd stop service lighttpd init/*
resulted in the following message:
*/2022-04-17 10:37:01: (mod_openssl.c.427) SSL:
BIO_read_filename('/etc/ssl/AstLinux.pem') failed
/*On investigation the file /etc/ssl/AstLinux.pem was not there on the
my file system
Then by using the /etc/ssl/default_https.pem file that was there, I
copied the “default_https.pem” file and renamed it to "AstLinux.pem" and
so it was there now.
Rebooted and this solved the problem - https://192.168.1.141/status.php
now works fine
I’m not sure if any of that makes sense but this may help:
Before – when I couldn’t access the Web Interface GUI Management Page
After – problem solved
So – thanks once again
Best wishes
Steve
On 17/04/2022 11:10, Michael Keuter wrote:
Let's wait for Lonnie to chime in - in a few hours.
Am 17.04.2022 um 11:48 schrieb Steve Barlow<stevey...@gmail.com>:
Thanks for your reply Michael
I tried
https://192.168.1.141/admin/status.php
But still no joy....
Please see below the response I got when I input your suggestions via putty
pbx ~ #
pbx ~ # ps | grep lighttpd
1848 root grep lighttpd
pbx ~ #
pbx ~ # service lighttpd stop
pbx ~ # service lighttpd init
Starting lighttpd...
WARNING WARNING WARNING
YOU STILL HAVE NOT CHANGED YOUR HTTPS ADMIN PASSWORD
ANYONE THAT KNOWS YOU ARE USING ASTLINUX CAN DESTROY YOUR
SYSTEM. PLEASE CHANGE THIS OR DISABLE THE HTTPS ADMIN
INTERFACE IMMEDIATELY!
Example:
htpasswd /var/www/admin/.htpasswd admin
WARNING WARNING WARNING
2022-04-17 10:37:01: (mod_openssl.c.427) SSL:
BIO_read_filename('/etc/ssl/AstLinux.pem') failed
2022-04-17 10:37:01: (server.c.1161) Initialization of plugins failed. Going
down.
pbx ~ #
Best wishes
Steve.
On 17/04/2022 10:13, Michael Keuter wrote:
Am 17.04.2022 um 00:25 schrieb Steve Barlow<stevey...@gmail.com>
:
Hello there everyone, I am a ‘very basic level user’ who has been successfully
using Astlinux for approx. the last 5 years, for the interconnection of my
heritage telephones and communication with other enthusiasts.
I recently updated the firmware on my HP T5720 Thin Client PC to Astlinux 1.3.8
along with Asterisk 13.31.0
However, now after rebooting/restarting I have ‘lost’ my Web Interface to the
‘Astlinux Management’ page.
I used to access this by entering in my Google Chrome Browser:
https://192.168.1.141/status.php
Hi Steve,
do you have tried:
https://192.168.1.141/admin/status.php
If it fails, maybe lighttpd (the webserver) is not running. You can try via ssh:
ps | grep lighttpd
1442 root lighttpd -f /etc/lighttpd.conf
5144 root grep lighttpd
The first line shows here that lighttpd is running (1442), if not try this to
start lighttpd:
service lighttpd stop
service lighttpd init
But I now get the message returned:
This site can’t be reached
192.168.1.141 took too long to respond.
However, the good news is that I can still make and receive calls etc. etc. and
can SSH access to all my folders/files via Putty or access them via WinSCP
using SFTP
Any ideas anyone on how I can access the ‘Astlinux Management’ GUI again
without doing total reinstall?
Best wishes
Steve - UK
Michael
http://www.mksolutions.info
_______________________________________________
Astlinux-users mailing list
Astlinux-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to
pay...@krisk.org.
Michael
http://www.mksolutions.info
_______________________________________________
Astlinux-users mailing list
Astlinux-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to
pay...@krisk.org.
