Kalle Valo <kv...@qca.qualcomm.com> writes:
> Add testmode interface for starting and using UTF firmware which is used to
> run
> factory tests. This is implemented by adding new state ATH10K_STATE_UTF and
> user
> space can enable this state with ATH10K_TM_CMD_UTF_START command. To go back
> to
> normal mode user space can send ATH10K_TM_CMD_UTF_STOP.
>
> Signed-off-by: Kalle Valo <kv...@qca.qualcomm.com>
[...]
> +/* "API" level of the ath10k testmode interface. Bump it after every
> + * incompatible interface change. */
> +#define ATH10K_TESTMODE_VERSION_MAJOR 1
> +
> +/* Bump this after every _compatible_ interface change, for example
> + * addition of a new command or an attribute. */
> +#define ATH10K_TESTMODE_VERSION_MINOR 0
> +
> +#define ATH10K_TM_DATA_MAX_LEN 5000
> +
> +enum ath10k_tm_attr {
> + __ATH10K_TM_ATTR_INVALID = 0,
> + ATH10K_TM_ATTR_CMD = 1,
> + ATH10K_TM_ATTR_DATA = 2,
> + ATH10K_TM_ATTR_WMI_CMDID = 3,
> + ATH10K_TM_ATTR_VERSION_MAJOR = 4,
> + ATH10K_TM_ATTR_VERSION_MINOR = 5,
> +
> + /* keep last */
> + __ATH10K_TM_ATTR_AFTER_LAST,
> + ATH10K_TM_ATTR_MAX = __ATH10K_TM_ATTR_AFTER_LAST - 1,
> +};
> +
> +/* All ath10k testmode interface commands specified in
> + * ATH10K_TM_ATTR_CMD */
> +enum ath10k_tm_cmd {
> + /* Returns the supported ath10k testmode interface version in
> + * ATH10K_TM_ATTR_VERSION. Always guaranteed to work. User space
> + * uses this to verify it's using the correct version of the
> + * testmode interface */
> + ATH10K_TM_CMD_GET_VERSION = 0,
> +
> + /* Boots the UTF firmware, the netdev interface must be down at the
> + * time. */
> + ATH10K_TM_CMD_UTF_START = 1,
> +
> + /* Shuts down the UTF firmware and puts the driver back into OFF
> + * state. */
> + ATH10K_TM_CMD_UTF_STOP = 2,
> +
> + /* The command used to transmit a WMI command to the firmware and
> + * the event to receive WMI events from the firmware. Without
> + * struct wmi_cmd_hdr header, only the WMI payload. Command id is
> + * provided with ATH10K_TM_ATTR_WMI_CMDID and payload in
> + * ATH10K_TM_ATTR_DATA.*/
> + ATH10K_TM_CMD_WMI = 3,
> +};
Johannes suggested to put this to a separate file as that way it's
easier for the user space. In v3 I'm planning to create testmode_uapi.h
for this.
--
Kalle Valo
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
