On 28 August 2014 09:30, Kalle Valo <kv...@qca.qualcomm.com> wrote:
> Add testmode interface for starting and using UTF firmware which is used to
> run
> factory tests. This is implemented by adding new state ATH10K_STATE_UTF and
> user
> space can enable this state with ATH10K_TM_CMD_UTF_START command. To go back
> to
> normal mode user space can send ATH10K_TM_CMD_UTF_STOP.
>
> Signed-off-by: Kalle Valo <kv...@qca.qualcomm.com>
> ---
> drivers/net/wireless/ath/ath10k/Makefile | 1
> drivers/net/wireless/ath/ath10k/core.c | 88 ++++--
> drivers/net/wireless/ath/ath10k/core.h | 22 +-
> drivers/net/wireless/ath/ath10k/debug.c | 5
> drivers/net/wireless/ath/ath10k/debug.h | 1
> drivers/net/wireless/ath/ath10k/hw.h | 2
> drivers/net/wireless/ath/ath10k/mac.c | 10 +
> drivers/net/wireless/ath/ath10k/testmode.c | 404
> ++++++++++++++++++++++++++++
> drivers/net/wireless/ath/ath10k/testmode.h | 46 +++
> drivers/net/wireless/ath/ath10k/wmi.c | 17 +
> 10 files changed, 566 insertions(+), 30 deletions(-)
> create mode 100644 drivers/net/wireless/ath/ath10k/testmode.c
> create mode 100644 drivers/net/wireless/ath/ath10k/testmode.h
>
> diff --git a/drivers/net/wireless/ath/ath10k/Makefile
> b/drivers/net/wireless/ath/ath10k/Makefile
> index 2cfb63ca9327..8b1b1adb477a 100644
> --- a/drivers/net/wireless/ath/ath10k/Makefile
> +++ b/drivers/net/wireless/ath/ath10k/Makefile
> @@ -11,6 +11,7 @@ ath10k_core-y += mac.o \
> bmi.o
>
> ath10k_core-$(CONFIG_ATH10K_DEBUGFS) += spectral.o
> +ath10k_core-$(CONFIG_NL80211_TESTMODE) += testmode.o
> ath10k_core-$(CONFIG_ATH10K_TRACING) += trace.o
>
> obj-$(CONFIG_ATH10K_PCI) += ath10k_pci.o
> diff --git a/drivers/net/wireless/ath/ath10k/core.c
> b/drivers/net/wireless/ath/ath10k/core.c
> index 651a6da8adf5..c01a37526ad5 100644
> --- a/drivers/net/wireless/ath/ath10k/core.c
> +++ b/drivers/net/wireless/ath/ath10k/core.c
> @@ -26,6 +26,7 @@
> #include "bmi.h"
> #include "debug.h"
> #include "htt.h"
> +#include "testmode.h"
>
> unsigned int ath10k_debug_mask;
> static bool uart_print;
> @@ -257,21 +258,42 @@ static int ath10k_download_and_run_otp(struct ath10k
> *ar)
> return 0;
> }
>
> -static int ath10k_download_fw(struct ath10k *ar)
> +static int ath10k_download_fw(struct ath10k *ar, enum ath10k_firmware_mode
> mode)
> {
> - u32 address;
> + u32 address, data_len;
> + const char *mode_name;
> + const void *data;
> int ret;
>
> address = ar->hw_params.patch_load_addr;
>
> - ret = ath10k_bmi_fast_download(ar, address, ar->firmware_data,
> - ar->firmware_len);
> + switch (mode) {
> + case ATH10K_FIRMWARE_MODE_NORMAL:
> + data = ar->firmware_data;
> + data_len = ar->firmware_len;
> + mode_name = "normal";
> + break;
> + case ATH10K_FIRMWARE_MODE_UTF:
> + data = ar->testmode.utf->data;
> + data_len = ar->testmode.utf->size;
> + mode_name = "utf";
> + break;
> + default:
> + ath10k_err(ar, "unknown firmware mode: %d\n", mode);
> + return -EINVAL;
> + }
> +
> + ath10k_dbg(ar, ATH10K_DBG_BOOT,
> + "boot uploading firmware image %p len %d mode %s\n",
> + data, data_len, mode_name);
> +
> + ret = ath10k_bmi_fast_download(ar, address, data, data_len);
> if (ret) {
> - ath10k_err(ar, "could not write fw (%d)\n", ret);
> - goto exit;
> + ath10k_err(ar, "failed to download %s firmware: %d\n",
> + mode_name, ret);
> + return ret;
> }
>
> -exit:
> return ret;
> }
>
> @@ -567,7 +589,8 @@ success:
> return 0;
> }
>
> -static int ath10k_init_download_firmware(struct ath10k *ar)
> +static int ath10k_init_download_firmware(struct ath10k *ar,
> + enum ath10k_firmware_mode mode)
> {
> int ret;
>
> @@ -583,7 +606,7 @@ static int ath10k_init_download_firmware(struct ath10k
> *ar)
> return ret;
> }
>
> - ret = ath10k_download_fw(ar);
> + ret = ath10k_download_fw(ar, mode);
> if (ret) {
> ath10k_err(ar, "failed to download firmware: %d\n", ret);
> return ret;
> @@ -685,12 +708,15 @@ static void ath10k_core_restart(struct work_struct
> *work)
> case ATH10K_STATE_WEDGED:
> ath10k_warn(ar, "device is wedged, will not restart\n");
> break;
> + case ATH10K_STATE_UTF:
> + ath10k_warn(ar, "firmware restart in UTF mode not
> supported\n");
> + break;
> }
>
> mutex_unlock(&ar->conf_mutex);
> }
>
> -int ath10k_core_start(struct ath10k *ar)
> +int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode)
> {
> int status;
>
> @@ -703,7 +729,7 @@ int ath10k_core_start(struct ath10k *ar)
> goto err;
> }
>
> - status = ath10k_init_download_firmware(ar);
> + status = ath10k_init_download_firmware(ar, mode);
> if (status)
> goto err;
>
> @@ -760,10 +786,12 @@ int ath10k_core_start(struct ath10k *ar)
> goto err_hif_stop;
> }
>
> - status = ath10k_htt_connect(&ar->htt);
> - if (status) {
> - ath10k_err(ar, "failed to connect htt (%d)\n", status);
> - goto err_hif_stop;
> + if (mode == ATH10K_FIRMWARE_MODE_NORMAL) {
> + status = ath10k_htt_connect(&ar->htt);
> + if (status) {
> + ath10k_err(ar, "failed to connect htt (%d)\n",
> status);
> + goto err_hif_stop;
> + }
> }
>
> status = ath10k_wmi_connect(ar);
> @@ -778,11 +806,13 @@ int ath10k_core_start(struct ath10k *ar)
> goto err_hif_stop;
> }
>
> - status = ath10k_wmi_wait_for_service_ready(ar);
> - if (status <= 0) {
> - ath10k_warn(ar, "wmi service ready event not received");
> - status = -ETIMEDOUT;
> - goto err_hif_stop;
> + if (mode == ATH10K_FIRMWARE_MODE_NORMAL) {
> + status = ath10k_wmi_wait_for_service_ready(ar);
> + if (status <= 0) {
> + ath10k_warn(ar, "wmi service ready event not
> received");
> + status = -ETIMEDOUT;
> + goto err_hif_stop;
> + }
> }
>
> ath10k_dbg(ar, ATH10K_DBG_BOOT, "firmware %s booted\n",
> @@ -802,10 +832,13 @@ int ath10k_core_start(struct ath10k *ar)
> goto err_hif_stop;
> }
>
> - status = ath10k_htt_setup(&ar->htt);
> - if (status) {
> - ath10k_err(ar, "failed to setup htt: %d\n", status);
> - goto err_hif_stop;
> + /* we don't care about HTT in UTF mode */
> + if (mode == ATH10K_FIRMWARE_MODE_NORMAL) {
> + status = ath10k_htt_setup(&ar->htt);
> + if (status) {
> + ath10k_err(ar, "failed to setup htt: %d\n", status);
> + goto err_hif_stop;
> + }
> }
>
> status = ath10k_debug_start(ar);
> @@ -861,7 +894,8 @@ void ath10k_core_stop(struct ath10k *ar)
> lockdep_assert_held(&ar->conf_mutex);
>
> /* try to suspend target */
> - if (ar->state != ATH10K_STATE_RESTARTING)
> + if (ar->state != ATH10K_STATE_RESTARTING &&
> + ar->state != ATH10K_STATE_UTF)
> ath10k_wait_for_suspend(ar,
> WMI_PDEV_SUSPEND_AND_DISABLE_INTR);
>
> ath10k_debug_stop(ar);
> @@ -914,7 +948,7 @@ static int ath10k_core_probe_fw(struct ath10k *ar)
>
> mutex_lock(&ar->conf_mutex);
>
> - ret = ath10k_core_start(ar);
> + ret = ath10k_core_start(ar, ATH10K_FIRMWARE_MODE_NORMAL);
> if (ret) {
> ath10k_err(ar, "could not init core (%d)\n", ret);
> ath10k_core_free_firmware_files(ar);
> @@ -1041,6 +1075,8 @@ void ath10k_core_unregister(struct ath10k *ar)
> * unhappy about callback failures. */
> ath10k_mac_unregister(ar);
>
> + ath10k_testmode_destroy(ar);
> +
> ath10k_core_free_firmware_files(ar);
>
> ath10k_debug_destroy(ar);
> diff --git a/drivers/net/wireless/ath/ath10k/core.h
> b/drivers/net/wireless/ath/ath10k/core.h
> index 4ef476099225..e31df4939b16 100644
> --- a/drivers/net/wireless/ath/ath10k/core.h
> +++ b/drivers/net/wireless/ath/ath10k/core.h
> @@ -330,6 +330,17 @@ enum ath10k_state {
> * prevents completion timeouts and makes the driver more responsive
> to
> * userspace commands. This is also prevents recursive recovery. */
> ATH10K_STATE_WEDGED,
> +
> + /* factory tests */
> + ATH10K_STATE_UTF,
> +};
> +
> +enum ath10k_firmware_mode {
> + /* the default mode, standard 802.11 functionality */
> + ATH10K_FIRMWARE_MODE_NORMAL,
> +
> + /* factory tests etc */
> + ATH10K_FIRMWARE_MODE_UTF,
> };
>
> enum ath10k_fw_features {
> @@ -544,6 +555,15 @@ struct ath10k {
> struct ath10k_spec_scan config;
> } spectral;
>
> + struct {
> + /* protected by conf_mutex */
> + const struct firmware *utf;
> + DECLARE_BITMAP(orig_fw_features, ATH10K_FW_FEATURE_COUNT);
> +
> + /* protected by data_lock */
> + bool utf_monitor;
> + } testmode;
> +
> /* must be last */
> u8 drv_priv[0] __aligned(sizeof(void *));
> };
> @@ -552,7 +572,7 @@ struct ath10k *ath10k_core_create(size_t priv_size,
> struct device *dev,
> const struct ath10k_hif_ops *hif_ops);
> void ath10k_core_destroy(struct ath10k *ar);
>
> -int ath10k_core_start(struct ath10k *ar);
> +int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode);
> int ath10k_wait_for_suspend(struct ath10k *ar, u32 suspend_opt);
> void ath10k_core_stop(struct ath10k *ar);
> int ath10k_core_register(struct ath10k *ar, u32 chip_id);
> diff --git a/drivers/net/wireless/ath/ath10k/debug.c
> b/drivers/net/wireless/ath/ath10k/debug.c
> index f3f0a80f8bab..928f8b795827 100644
> --- a/drivers/net/wireless/ath/ath10k/debug.c
> +++ b/drivers/net/wireless/ath/ath10k/debug.c
> @@ -134,11 +134,12 @@ void ath10k_print_driver_info(struct ath10k *ar)
> ar->fw_api,
> ar->htt.target_version_major,
> ar->htt.target_version_minor);
> - ath10k_info(ar, "debug %d debugfs %d tracing %d dfs %d\n",
> + ath10k_info(ar, "debug %d debugfs %d tracing %d dfs %d testmode %d\n",
> config_enabled(CONFIG_ATH10K_DEBUG),
> config_enabled(CONFIG_ATH10K_DEBUGFS),
> config_enabled(CONFIG_ATH10K_TRACING),
> - config_enabled(CONFIG_ATH10K_DFS_CERTIFIED));
> + config_enabled(CONFIG_ATH10K_DFS_CERTIFIED),
> + config_enabled(CONFIG_NL80211_TESTMODE));
> }
> EXPORT_SYMBOL(ath10k_print_driver_info);
>
> diff --git a/drivers/net/wireless/ath/ath10k/debug.h
> b/drivers/net/wireless/ath/ath10k/debug.h
> index 56746539bea2..fdc8ba23301a 100644
> --- a/drivers/net/wireless/ath/ath10k/debug.h
> +++ b/drivers/net/wireless/ath/ath10k/debug.h
> @@ -34,6 +34,7 @@ enum ath10k_debug_mask {
> ATH10K_DBG_DATA = 0x00000200,
> ATH10K_DBG_BMI = 0x00000400,
> ATH10K_DBG_REGULATORY = 0x00000800,
> + ATH10K_DBG_TESTMODE = 0x00001000,
> ATH10K_DBG_ANY = 0xffffffff,
> };
>
> diff --git a/drivers/net/wireless/ath/ath10k/hw.h
> b/drivers/net/wireless/ath/ath10k/hw.h
> index 13568b01de9f..3cf5702c1e7e 100644
> --- a/drivers/net/wireless/ath/ath10k/hw.h
> +++ b/drivers/net/wireless/ath/ath10k/hw.h
> @@ -36,6 +36,8 @@
> #define ATH10K_FW_API2_FILE "firmware-2.bin"
> #define ATH10K_FW_API3_FILE "firmware-3.bin"
>
> +#define ATH10K_FW_UTF_FILE "utf.bin"
> +
> /* includes also the null byte */
> #define ATH10K_FIRMWARE_MAGIC "QCA-ATH10K"
>
> diff --git a/drivers/net/wireless/ath/ath10k/mac.c
> b/drivers/net/wireless/ath/ath10k/mac.c
> index b858c8288196..d0efeeb200fd 100644
> --- a/drivers/net/wireless/ath/ath10k/mac.c
> +++ b/drivers/net/wireless/ath/ath10k/mac.c
> @@ -26,6 +26,7 @@
> #include "wmi.h"
> #include "htt.h"
> #include "txrx.h"
> +#include "testmode.h"
>
> /**********/
> /* Crypto */
> @@ -2483,8 +2484,12 @@ static int ath10k_start(struct ieee80211_hw *hw)
> case ATH10K_STATE_RESTARTED:
> case ATH10K_STATE_WEDGED:
> WARN_ON(1);
> + /* fall through */
Fall through? I see there's a goto ahead..
> ret = -EINVAL;
> goto err;
> + case ATH10K_STATE_UTF:
> + ret = -EBUSY;
> + goto err;
> }
>
> ret = ath10k_hif_power_up(ar);
> @@ -2493,7 +2498,7 @@ static int ath10k_start(struct ieee80211_hw *hw)
> goto err_off;
> }
>
> - ret = ath10k_core_start(ar);
> + ret = ath10k_core_start(ar, ATH10K_FIRMWARE_MODE_NORMAL);
> if (ret) {
> ath10k_err(ar, "Could not init core: %d\n", ret);
> goto err_power_down;
> @@ -4472,6 +4477,9 @@ static const struct ieee80211_ops ath10k_ops = {
> .sta_rc_update = ath10k_sta_rc_update,
> .get_tsf = ath10k_get_tsf,
> .ampdu_action = ath10k_ampdu_action,
> +
> + CFG80211_TESTMODE_CMD(ath10k_tm_cmd)
> +
> #ifdef CONFIG_PM
> .suspend = ath10k_suspend,
> .resume = ath10k_resume,
> diff --git a/drivers/net/wireless/ath/ath10k/testmode.c
> b/drivers/net/wireless/ath/ath10k/testmode.c
> new file mode 100644
> index 000000000000..e07bdb76174b
> --- /dev/null
> +++ b/drivers/net/wireless/ath/ath10k/testmode.c
> @@ -0,0 +1,404 @@
> +/*
> + * Copyright (c) 2014 Qualcomm Atheros, Inc.
> + *
> + * Permission to use, copy, modify, and/or distribute this software for any
> + * purpose with or without fee is hereby granted, provided that the above
> + * copyright notice and this permission notice appear in all copies.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
> + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
> + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
> + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
> + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
> + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
> + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
> + */
> +
> +#include "testmode.h"
> +
> +#include <net/netlink.h>
> +#include <linux/firmware.h>
> +
> +#include "debug.h"
> +#include "wmi.h"
> +#include "hif.h"
> +#include "hw.h"
> +
> +/* "API" level of the ath10k testmode interface. Bump it after every
> + * incompatible interface change. */
I recall we reached a conclusion to use the following multiline
comment style in ath10k:
/* Foo
* Bar
*/
Ah, here it is: http://www.spinics.net/lists/linux-wireless/msg123419.html
But this isn't really important.
> +static int ath10k_tm_cmd_utf_start(struct ath10k *ar, struct nlattr *tb[])
> +{
> + char filename[100];
> + int ret;
> +
> + ath10k_dbg(ar, ATH10K_DBG_TESTMODE, "testmode cmd utf start\n");
> +
> + mutex_lock(&ar->conf_mutex);
> +
> + if (ar->state == ATH10K_STATE_UTF) {
> + ret = -EALREADY;
> + goto out;
> + }
> +
> + /* start utf only when the driver is not in use */
> + if (ar->state != ATH10K_STATE_OFF) {
> + ret = -EBUSY;
> + goto out;
> + }
> +
> + if (ar->testmode.utf != NULL)
> + /* utf image is already downloaded */
> + goto power_up;
> +
> +
2 empty newlines.
> + snprintf(filename, sizeof(filename), "%s/%s",
> + ar->hw_params.fw.dir, ATH10K_FW_UTF_FILE);
> +
> + /* load utf image now and release only when the device is removed */
> + ret = request_firmware(&ar->testmode.utf, filename, ar->dev);
> + if (ret) {
> + ath10k_warn(ar, "failed to retrieve utf firmware '%s': %d\n",
> + filename, ret);
> + goto out;
> + }
> +
> + BUILD_BUG_ON(sizeof(ar->fw_features) !=
> + sizeof(ar->testmode.orig_fw_features));
> +
> + memcpy(ar->testmode.orig_fw_features, ar->fw_features,
> + sizeof(ar->fw_features));
> +
> + /* force to use correct version of WMI interface */
> + memset(ar->fw_features, 0, sizeof(ar->fw_features));
> + __set_bit(ATH10K_FW_FEATURE_WMI_10X, ar->fw_features);
I'm a little worried about this.
First of all the comment doesn't really explain why this is done, i.e.
utf.bin isn't FW IE encapsulated and as such fw_features are unknown.
And then what about utf binaries which use 10.2 WMI? Or non-10.x WMI?
> +
> +power_up:
> + spin_lock_bh(&ar->data_lock);
> +
> + ar->testmode.utf_monitor = true;
> +
> + spin_unlock_bh(&ar->data_lock);
> +
> + ret = ath10k_hif_power_up(ar);
> + if (ret) {
> + ath10k_err(ar, "failed to power up hif (testmode): %d\n",
> ret);
> + ar->state = ATH10K_STATE_OFF;
> + goto out;
> + }
> +
> + ret = ath10k_core_start(ar, ATH10K_FIRMWARE_MODE_UTF);
> + if (ret) {
> + ath10k_err(ar, "failed to start core (testmode): %d\n", ret);
> + ath10k_hif_power_down(ar);
> + ar->state = ATH10K_STATE_OFF;
> + goto out;
> + }
You don't seem to be freeing firmware on failure here. I'm aware
ath10k_testmode_destroy() takes care of it but if you happen to use a
defect fw (or hit some kind of a fw-hw combination bug) each
subsequent utf start will re-use the firmware binary - it won't
re-read the binary (giving you a chance to replace utf binary with a
different one) unless you reload the whole module or re-bind the
device<->driver via sysfs or physically.
> +static int ath10k_tm_cmd_utf_stop(struct ath10k *ar, struct nlattr *tb[])
> +{
> + int ret;
> +
> + ath10k_dbg(ar, ATH10K_DBG_TESTMODE, "testmode cmd utf stop\n");
> +
> + mutex_lock(&ar->conf_mutex);
> +
> + if (ar->state != ATH10K_STATE_UTF) {
> + ret = -ENETDOWN;
> + goto out;
> + }
[...]
> +static int ath10k_tm_cmd_wmi(struct ath10k *ar, struct nlattr *tb[])
> +{
> + struct sk_buff *skb;
> + int ret, buf_len;
> + u32 cmd_id;
> + void *buf;
> +
> + mutex_lock(&ar->conf_mutex);
> +
> + if (ar->state != ATH10K_STATE_UTF) {
> + ret = EHOSTDOWN;
Shouldn't this be a negative number?
Also ath10k_tm_cmd_utf_stop() uses -ENETDOWN for this case.
Michał
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
