Wen Gong <wg...@codeaurora.org> writes:
> When firmware assert, it need coredump to analyze, this patch will
> collect the register and memory info for sdio chip.
>
> The coredump configuration is different between PCIE and SDIO for
> the same reversion, so this patch add bus type to distinguish PCIE
> and SDIO chip for coredump.
>
> Tested with QCA6174 SDIO with firmware
> WLAN.RMH.4.4.1-00007-QCARMSWP-1.
>
> Signed-off-by: Wen Gong <wg...@codeaurora.org>
I think this patch should be split into two, the first patch preparing
coredump layouts to support different bus types and the second patch
adding coredump support for SDIO.
> --- a/drivers/net/wireless/ath/ath10k/hw.h
> +++ b/drivers/net/wireless/ath/ath10k/hw.h
> @@ -11,6 +11,7 @@
> #include "targaddrs.h"
>
> enum ath10k_bus {
> + ATH10K_BUS_ANY,
> ATH10K_BUS_PCI,
> ATH10K_BUS_AHB,
> ATH10K_BUS_SDIO,
I don't think we need add this type ANY. From a quick look QCA4019 is
AHB and all the rest are PCI, right? So in the first patch you only need
to add correct bus type for each entry and everything should work as
before.
--
Kalle Valo
