On Jan 18, 2008 7:51 AM, Bruno Randolf <[EMAIL PROTECTED]> wrote:
> the beacon interval is passed by mac80211 in TU already, so we can directly
> use
> it without conversion. also update the comments about TU (1 TU is defined by
> 802.11 as 1024usec).
>
> drivers/net/wireless/ath5k/ath5k.h: Changes-licensed-under: ISC
> drivers/net/wireless/ath5k/base.c: Changes-licensed-under: 3-Clause-BSD
> drivers/net/wireless/ath5k/base.h: Changes-licensed-under: 3-Clause-BSD
>
> Signed-off-by: Bruno Randolf <[EMAIL PROTECTED]>
> ---
>
> drivers/net/wireless/ath5k/ath5k.h | 4 ++--
> drivers/net/wireless/ath5k/base.c | 4 ++--
> drivers/net/wireless/ath5k/base.h | 2 +-
> 3 files changed, 5 insertions(+), 5 deletions(-)
>
>
> diff --git a/drivers/net/wireless/ath5k/ath5k.h
> b/drivers/net/wireless/ath5k/ath5k.h
> index 878609f..c79066b 100644
> --- a/drivers/net/wireless/ath5k/ath5k.h
> +++ b/drivers/net/wireless/ath5k/ath5k.h
> @@ -486,8 +486,8 @@ struct ath5k_beacon_state {
> * TSF to TU conversion:
> *
> * TSF is a 64bit value in usec (microseconds).
> - * TU is a 32bit value in roughly msec (milliseconds): usec / 1024
> - * (1000ms equals 976 TU)
> + * TU is a 32bit value and defined by IEEE802.11 (page 6) as "A measurement
> of
> + * time equal to 1024 usec", so it's roughly milliseconds (usec / 1024).
> */
> #define TSF_TO_TU(_tsf) (u32)((_tsf) >> 10)
>
> diff --git a/drivers/net/wireless/ath5k/base.c
> b/drivers/net/wireless/ath5k/base.c
> index bb1745f..784b359 100644
> --- a/drivers/net/wireless/ath5k/base.c
> +++ b/drivers/net/wireless/ath5k/base.c
> @@ -2550,7 +2550,7 @@ ath5k_config(struct ieee80211_hw *hw,
> {
> struct ath5k_softc *sc = hw->priv;
>
> - sc->bintval = conf->beacon_int * 1000 / 1024;
> + sc->bintval = conf->beacon_int;
> ath5k_setcurmode(sc, conf->phymode);
>
> return ath5k_chan_set(sc, conf->chan);
> @@ -2566,7 +2566,7 @@ ath5k_config_interface(struct ieee80211_hw *hw, struct
> ieee80211_vif *vif,
>
> /* Set to a reasonable value. Note that this will
> * be set to mac80211's value at ath5k_config(). */
> - sc->bintval = 1000 * 1000 / 1024;
> + sc->bintval = 1000;
Sure, although as I noted this value will be later set by mac80211
through ath5k_config().
Acked-by: Luis R. Rodriguez <[EMAIL PROTECTED]>
Luis
_______________________________________________
ath5k-devel mailing list
ath5k-devel@lists.ath5k.org
https://lists.ath5k.org/mailman/listinfo/ath5k-devel
