2008/11/10 Maxim Levitsky <[EMAIL PROTECTED]>: > Bob Copeland wrote: >> On Fri, Nov 7, 2008 at 10:26 PM, Maxim Levitsky <[EMAIL PROTECTED]> wrote: >>> ** 2 - wireless: not to mention the fact that ath5k wasn't installed by >>> default in ubuntu... >>> wireless more or less works, but kernel log is full of backtraces. >> >> As you've seen, these should at least be gone now... >> >>> Was able to connect to my WPA2 access point. >>> Sometimes wireless fails completely, especially after suspend to ram. >> >> Did you get noise calibration failures in dmesg at this point? Felix posted >> a patch recently that handles them better. > Yep, but they seems to be gone in latest -git too. > Wireless work fine now, it seems like my iwl3945. > >> >>> Advanced features like monitor/injection work, but when I changed the card's >>> mac address it stopped working. >>> I also noticed that if I then start airodump, then wireless works with new >>> mac. > Why it doesn't accept new mac?, can this be fixed? > > >> >>> ** 4 - wireless led doesn't work. >>> ath5k devs, can you fix this? >> >> Currently all the LED code we have in there is for setting a particular gpio >> for particular laptops (and they differ between models). We only have quirks >> for IBM and HP, none for Acer. Also, the legacy-hal seems to have a >> different >> strategy for 2425 chips. I can try to hack up some code for you to test. >> > > I have seen on the web that madwifi did support the led with some gpio > settings > > sysctl -w dev.wifi0.ledpin=3 > sysctl -w dev.wifi0.softled=1 > > from https://help.ubuntu.com/community/AspireOne > > Best regards, > Maxim Levitsky
i think that some led settings are stored on EEPROM, let me check it out... -- GPG ID: 0xD21DB2DB As you read this post global entropy rises. Have Fun ;-) Nick _______________________________________________ ath5k-devel mailing list ath5k-devel@lists.ath5k.org https://lists.ath5k.org/mailman/listinfo/ath5k-devel
