I used iw to set reg for example to US but iw get show 00 again. I think there must be something wrong in new driver compat-wireless-2009-08-08 because my last driver (kernel 2.6.27.7) with the same setting for new one, shows the correct valuse for txpower (27 dbm). new driver show txpower is 20 dbm Whiles epi-3601s is 600mw card.
- ---- Original Message ---- From: Pavel Roskin <pro...@gnu.org> To: alireza ghahremanian <mat...@yahoo.com> Cc: ath5k-devel@lists.ath5k.org Sent: Tuesday, August 11, 2009 10:58:00 PM Subject: Re: epi-3601s On Tue, 2009-08-11 at 11:03 -0700, alireza ghahremanian wrote: > 1. My system freezes in both madwifi (madwifi-0.9.4-r4073-20090708) it is in > ap mode and I change the channel. The MadWifi problems should be discussed in MadWifi lists. It's a different piece of software with different problems. I think it's a known problem for MadWifi: https://madwifi-project.org/ticket/1903 The version of ath5k is the version of the kernel. Until you specify it, there is nothing to discuss. > 2. why can madwifi act as ap standalone without user level program but ath5k > can not? Because ath5k is mac80211 based and doesn't contain some code for AP management that MadWifi has. > 3. iw reg get has result country 00. but different driver show defferent > power. It means you didn't set it to your country. Use "iw reg set" for that. > 4. throuput of ath5k and hostapd as ap is aout 9Mbps against 22Mbps of > madwifi ap mode with the same conditions. why? I have no idea. One would need to analyze the traffic, rates, fragmentation, delays on both sides. -- Regards, Pavel Roskin _______________________________________________ ath5k-devel mailing list ath5k-devel@lists.ath5k.org https://lists.ath5k.org/mailman/listinfo/ath5k-devel
