Hi Nick > > FIRPWR is a field, are you reading the whole register > or just that field (of course you need to do some typecasting > there) ?
I read firpwrval = ath5k_hw_reg_read(ah, AR5K_PHY_SIG)& AR5K_PHY_SIG_FIRPWR > btw there is also rssi threshold etc, what exactly do you > want to do ? Initially i looked for RSSI threshold bt i think that doesnt affect rx side only tx side(carrier sense) I have two laptops placed close with ath5k (mesh mode) and 20dbm txpwr(iwconfig). i want to raise the rx trigger threshold in a way that laptops only receive each others transmission. since they are close to each other, the received pwr will be much higher than lets say if an AP far away transmits. So wen AP transmits no reception will be triggered bt if any of the laptop transmits reception will be triggered. I hope this is posbl Thanks!! Shashi _______________________________________________ ath5k-devel mailing list ath5k-devel@lists.ath5k.org https://lists.ath5k.org/mailman/listinfo/ath5k-devel