2011/11/22 Qasim Javed <qas...@gmail.com>: > Why don't you log packets using tshark/tcpdump on a monitor mode interface > and then do your analysis on the log? > > If you don't log the packets then the only way is to modify the mac80211 > source code to not count the beacons which should be pretty straightforward > to do. > > -Qasim > > On Tue, Nov 22, 2011 at 5:42 AM, Mariana Gambande <mlgamba...@gmail.com> > wrote: >> >> Hello to all, >> I've realized the rx_fragments and rx_bytes continually increase because >> of the beacons (I thought the beacons were not recorded if the iface is not >> in monitor mode). I would like to know how to stop registering the beacons >> in this situation. I've tried changing the value of AR5K_RX_FILTER_BEACON >> but it stops detecting other stations instead of just not registering the >> beacons. >> Thanks in advance! >> Mariana >> >> 2011/11/14 Mariana Gambande <mlgamba...@gmail.com> >>> >>> Hi to all! >>> I have an issue regarding the debugfs statistics. I'm working with ad-hoc >>> mode and monitoring statistics in >>> /sys/kernel/debug/ieee80211/phy0/stations/. I have observed that having no >>> activity between two stations connected in ad-hoc mode (no one is sending >>> anything), the variables rx_fragments and rx_bytes continually increase. >>> This can be seen with the command 'iw $iface station dump' also. >>> I would expect that variables >>> in /sys/kernel/debug/ieee80211/phy0/statistics could get increase because >>> of some "noise" (other AP around, etc) but not in the per station >>> statistics. This happens with both connected stations and no one >>> shown tx_bytes/tx_packets. >>> I'm working with compat-wireless-2.6.35-1. >>> Are these really per station statistics? >>> Thanks in advance! >>> Mariana >>> >>
Since you know the beacon interval and the time spent you can filter out beacons from you measurements easily. -- GPG ID: 0xEE878588 As you read this post global entropy rises. Have Fun ;-) Nick _______________________________________________ ath5k-devel mailing list ath5k-devel@lists.ath5k.org https://lists.ath5k.org/mailman/listinfo/ath5k-devel