On Sun, Nov 28, 2010 at 7:49 PM, Matthias Bernges
<matthiasbern...@gmx.de> wrote:
> ,Hello,
>
> 2010/11/26 Mohammed Shafi <shafi.at...@gmail.com>:
>> On Fri, Nov 26, 2010 at 12:17 AM, Matthias Bernges
>> <matthiasbern...@gmx.de> wrote:
>>> Hello,
>>>
>>> I've a TP-Link TL-WN422G using Atheros AR9271 chipset. I have
>>> downloaded and installed compat-wireless-2.6.36-4 and copied the
>>> newest ar9271.fw to /lib/firmware.
>> Can you please try with the latest compat-wrieless from
>> http://wireless.kernel.org/download/compat-wireless-2.6/
>>>
>>> The driver recognizes the stick and I am able to scan using "iwlist
>>> wlan0 scan". But I am not able to connect to a network.
>>>
>>> I have tried unencrypted und WEP-encrypted networks using iwconfig. No
>>> error occurs but when I do iwconfig it says:
>>> "Access Point: Not-Associated"
>>>
>> while using commands to connect to a AP please disable the Network Manager
>
> Good point. This helped for connecting to WPA networks using wpa_supplicant.
> But the behavior of iwconfig, while connecting to unencrypted or
> WEP-encrypted networks, didn't change.

Ideally it should be working.Can you just send me the iwconfig
commands you use to connect to WEP-encrypted networks or
open-networks.

>
> Best,
> Matthias
>
>>> I also tried to connect to a WPA2-encrypted network. I copied the
>>> config-file from a working machine so the key is definitely correct.
>>> [vortexbox.localdomain ~]# wpa_supplicant -i wlan0 -c wpa.conf -Dwext
>>> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
>>> ioctl[SIOCSIWSCAN]: Device or resource busy
>>> Failed to initiate AP scan.
>>> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
>>> Trying to associate with 00:1c:f0:cf:e5:ce (SSID='Pasta' freq=2462 MHz)
>>> Associated with 00:1c:f0:cf:e5:ce
>>> WPA: 4-Way Handshake failed - pre-shared key may be incorrect
>>> CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
>>> ioctl[SIOCSIWSCAN]: Device or resource busy
>>> Failed to initiate AP scan.
>>> Trying to associate with 00:1c:f0:cf:e5:ce (SSID='Pasta' freq=2462 MHz)
>>> Associated with 00:1c:f0:cf:e5:ce
>>> WPA: 4-Way Handshake failed - pre-shared key may be incorrect
>>> CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
>>> ioctl[SIOCSIWSCAN]: Device or resource busy
>>> Failed to initiate AP scan.
>>> Trying to associate with 00:1c:f0:cf:e5:ce (SSID='Pasta' freq=2462 MHz)
>>> Associated with 00:00:00:00:00:00
>>> CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
>>> ioctl[SIOCSIWSCAN]: Device or resource busy
>>> Failed to initiate AP scan.
>>> Trying to associate with 00:1c:f0:cf:e5:ce (SSID='Pasta' freq=2462 MHz)
>>> Associated with 00:00:00:00:00:00
>>>
>>> I don't know if it is relevant, but please mind that the "Associated
>>> with" line switches between  00:1c:f0:cf:e5:ce and 00:00:00:00:00:00.
>>>
>>> My modinfo:
>>> [vortexbox.localdomain ~]# modinfo ath9k_htc
>>> filename:
>>> /lib/modules/2.6.35.6-99.fc14.i686.PAE/kernel/drivers/net/wireless/ath/ath9k/ath9k_htc.ko
>>> description:    Atheros driver 802.11n HTC based wireless devices
>>> license:        Dual BSD/GPL
>>> author:         Atheros Communications
>>> srcversion:     D567C77238F6355D88D836E
>>> alias:          usb:v0CF3p1006d*dc*dsc*dp*ic*isc*ip*
>>> alias:          usb:v0CF3p9271d*dc*dsc*dp*ic*isc*ip*
>>> depends:        ath9k_hw,mac80211,ath9k_common,ath,cfg80211
>>> vermagic:       2.6.35.6-99.fc14.i686.PAE SMP mod_unload 686
>>> parm:           debug:Debugging mask (uint)
>>> parm:           nohwcrypt:Disable hardware encryption (int)
>>>
>>>
>>> Best,
>>>
>>> Matthias
>>> _______________________________________________
>>> ath9k-devel mailing list
>>> ath9k-devel@lists.ath9k.org
>>> https://lists.ath9k.org/mailman/listinfo/ath9k-devel
>>>
>>
> _______________________________________________
> ath9k-devel mailing list
> ath9k-devel@lists.ath9k.org
> https://lists.ath9k.org/mailman/listinfo/ath9k-devel
>
_______________________________________________
ath9k-devel mailing list
ath9k-devel@lists.ath9k.org
https://lists.ath9k.org/mailman/listinfo/ath9k-devel

Reply via email to