On Fri, Jul 27, 2012 at 6:20 PM, Yevgeniy Melnichuk <yevgeniy.melnic...@googlemail.com> wrote: > Hi Mohammed, > > thx for your reply. > > >> it was previously working right ? > > no, it was not working previously... neither with the stock kernel in ubuntu > 12.04, nor with vanilla 3.5.0 > > >> could please point me to the >> firmware or something you are using for BT, where i could >> just try this out ? > > I have never used bluetooth before, so i am not sure, where to look for the > information, you ask me for. > How can i tell what firmware i am using?
please follow the procedure mentioned in the link http://wireless.kernel.org/en/users/Drivers/ath3k if its AR3012 you need to create a dir like /lib/firmware/ar3k/ and then put those dfu For AR3012, you can find the "AthrBT_0x01020200.dfu" and "ramps_0x01020200_26.dfu" or "ramps_0x01020200_40.dfu" on the linux-firmware git tree: > > here is some information, that may help. > output by "lspci -s 02:00.0" > 02:00.0 Network controller: Atheros Communications Inc. AR9485 Wireless > Network Adapter (rev 01) > Subsystem: Foxconn International, Inc. Device e044 > Flags: bus master, fast devsel, latency 0, IRQ 16 > Memory at c3000000 (64-bit, non-prefetchable) [size=512K] > Expansion ROM at c0000000 [disabled] [size=64K] > Capabilities: [40] Power Management version 2 > Capabilities: [50] MSI: Enable- Count=1/4 Maskable+ 64bit+ > Capabilities: [70] Express Endpoint, MSI 00 > Capabilities: [100] Advanced Error Reporting > Capabilities: [140] Virtual Channel > Capabilities: [160] Device Serial Number 00-00-00-00-00-00-00-00 > Kernel driver in use: ath9k > Kernel modules: ath9k > > output by "rfkill list" > 0: sony-wifi: Wireless LAN > Soft blocked: no > Hard blocked: no > 1: sony-bluetooth: Bluetooth > Soft blocked: no > Hard blocked: no > 3: phy0: Wireless LAN > Soft blocked: no > Hard blocked: no > 4: hci0: Bluetooth > Soft blocked: no > Hard blocked: no > > output by hciconfig > hci0: Type: BR/EDR Bus: USB > BD Address: 08:ED:B9:CD:C0:70 ACL MTU: 1022:8 SCO MTU: 183:5 > UP RUNNING PSCAN > RX bytes:822 acl:0 sco:0 events:33 errors:0 > TX bytes:877 acl:0 sco:0 commands:33 errors:0 > > the following modules related to ath/bluetooth are loaded > ath9k > ath9k_common > ath9k_hw > ath > mac80211 > bluetooth > bnet > rfcomm > btusb > > i do the following steps to check whether it works or not. > i enable bluetooth with the bluetooth-applet in unity. > i check with "rfkill list" whether everything is unblocked > i run bluetooth-wizard from gnome-bluetooth package and start scanning > for devices. No devices ever show up. > > is this informtion sufficient? > > bye, > Yevgeniy > > _______________________________________________ > ath9k-devel mailing list > ath9k-devel@lists.ath9k.org > https://lists.ath9k.org/mailman/listinfo/ath9k-devel > _______________________________________________ ath9k-devel mailing list ath9k-devel@lists.ath9k.org https://lists.ath9k.org/mailman/listinfo/ath9k-devel