Thanks Adrian and Peter for your comments. We are in touch with COPEX and will
get the necessary changes done.
________________________________
From: Adrian Chadd <adr...@freebsd.org>
To: sandeep suresh <sandeep.sur...@yahoo.co.in>
Cc: Peter Stuge <pe...@stuge.se>; "ath9k-devel@lists.ath9k.org"
<ath9k-devel@lists.ath9k.org>
Sent: Tuesday, 19 March 2013 7:06 PM
Subject: Re: [ath9k-devel] Mapping between AR9287 pins to WLE200N2 PCIEe pins
No, it's not under software control.
adrian
On 19 March 2013 04:47, sandeep suresh <sandeep.sur...@yahoo.co.in> wrote:
> Thanks Peter.
> Currently on our board only certain pins from PCIe are brought out. If the
> mapping can be changed in software, than I can map to these already brought
> out pins.
> Regards
> Sandeep.
>
> From: Peter Stuge <pe...@stuge.se>
> To: ath9k-devel@lists.ath9k.org
> Sent: Tuesday, 19 March 2013 8:00 AM
> Subject: Re: [ath9k-devel] Mapping between AR9287 pins to WLE200N2 PCIEe
> pins
>
> sandeep suresh wrote:
>> There are 76 pins on AR9287 whereas the WLE200N2 PCIe interface has 52
>> pins.
>> Can anyone help me with the mapping between AR9287 to WLE200N2?
>
> Yes, Compex.
>
>
>> Is the mapping fixed by hardware design or can be changed in software
>
> Why do you care?
>
>
> //Peter
> _______________________________________________
> ath9k-devel mailing list
> ath9k-devel@lists.ath9k.org
> https://lists.ath9k.org/mailman/listinfo/ath9k-devel
>
>
>
> _______________________________________________
> ath9k-devel mailing list
> ath9k-devel@lists.ath9k.org
> https://lists.ath9k.org/mailman/listinfo/ath9k-devel
>
_______________________________________________
ath9k-devel mailing list
ath9k-devel@lists.ath9k.org
https://lists.ath9k.org/mailman/listinfo/ath9k-devel
