Hi, It may be something as simple as GPIO pin settings.
Would you mind taking a look at both the atheros SoC GPIO register contents and the on-board CPU GPIO register contents? Thanks, -a On 20 September 2014 01:48, Birger Brunswiek <bir...@brunswiek.org> wrote: > Hi List, > I want to use OpenWRT on my Ubnt UniFi Outdoor Plus. So far all works > but the Wifi. The symptoms are poor reception and normal transmission > levels. The problems do not appear using the stock firmware. They only > appear after a power cycle when using OpenWRT. OpenWRT works as expected > if no power cycle was performed after installation. It was suggested > that this is due to the RF filter built into the unit > (https://lists.openwrt.org/pipermail/openwrt-devel/2014-September/028103.html). > Does anyone have some pointers so I can fix this? Perhaps somehow > outputting the content of the registers before doing the power cycle? > > Cheers, > Birger > _______________________________________________ > ath9k-devel mailing list > ath9k-devel@lists.ath9k.org > https://lists.ath9k.org/mailman/listinfo/ath9k-devel _______________________________________________ ath9k-devel mailing list ath9k-devel@lists.ath9k.org https://lists.ath9k.org/mailman/listinfo/ath9k-devel
