Re: BrushTone v1.2 Paint Tool
Hm, this would be the second time the TTS outputs been flaking out. I'm not really sure whats up with that, it might be system specific since it seems to effect people sporatically, at least from the reports i've gotten so far and my own tests.
Unfortunately no, there is no implemented way of increasing the pitch range. The pitch currently covers a range between 0.5 to 1.5 to represent numerical values from 0 to 255, if I tried pushing it any higher it would distort the audio and cause artifacts, if its much lower it would be difficult to hear it at all. It could be possible to narrow the range, such as having it only view color values from 0 to 125, or 85 to 170, but that would prevent users from percieving colors outside those ranges. Design wise the current system isn't necessarily a bad thing, if there are very small differences in colors that make it hard to tell the difference between tones via sound, there's a very good chance that sighted users wo uld have a hard time telling the difference too. Well, unless their tetrachromats.
You can press and hold the "Z" key though and it should speak the raw numerical RGB values of the color under the cursor, which you can use to compare with adjacent colors for greater accuracy.
_______________________________________________ Audiogames-reflector mailing list Audiogames-reflector@sabahattin-gucukoglu.com https://sabahattin-gucukoglu.com/cgi-bin/mailman/listinfo/audiogames-reflector
