Re: censoring words in audacity?
moving the cursor left and right is as easy as eating a bread, and here's how you can do it
ovviously, if you want to move the cursor, right, press right arrow. tip. use space after moving the cursor so you can see where it says the name
after this, use shift right arrow in the name, pressing space often, if you heard that it crossed a bit the boundary you wanted, prress ctrl1 (to zoom out) so you can press ctrl shift right arrow to contract the selection
go to generate.
press alt.
press right arrow 7times, then down arrow.
go to the option that says tone...
press enter
now, put in the frequency field this number
1000
note. the 1khz tone is typically used for censoring, but if you want a softer and unique sound instead of that anoying bleep sound, go to generate (press alt and then right arrow 7times) and press down arrow. then go to noise...
in noise, you have to select white noise, set the amplitude at 0.2, and dont touch the duration parameter. the same for tone, but put 1000 in the frequency field, and set amplitude to 0.2, amplitude is after frequency. after this, depending in your choosing tone noise, press enter. the name has been overwriten by the tone or the noise
if you have a bit of a struggle, dont hesitate to ask!
-- Audiogames-reflector mailing list Audiogames-reflector@sabahattin-gucukoglu.com https://sabahattin-gucukoglu.com/cgi-bin/mailman/listinfo/audiogames-reflector
