Heuer Wrote: > This supply is NOT SUITABLE for use with an SB3 as it is rated at > 1.5amps - the SB3 supply should be at least 2 amps, preferably 3amps > for reliable operation. > > I have measured my SB3 as drawing 1.3 amps using the digital outs, WiFi > off, so could be more with headphones, wireless, analogue out, display > options or temperature change (I have not measured these). Not much > headroom if you are using a 1.5amp supply! > > Probably better off sticking with the original switching supply rather > than risking causing damage to the SB3 with one of these. If it fails > it could also destroy the SB3 and I doubt Slim Devices will be > particularly sympathetic to your plight. > > If you are determined to use one make sure it has plenty of ventilation > and check regularly for overheating. It should get no hotter than the > stock SB3 supply if you need a benchmark.
I have been running the wireless SB3 with the ELPAC power supply for about a week...it stays nice and cool so it would appear that it is "safe" .... while I can't compare the sound before and after with any kind of measurements... I would say that the combo of SB3/ELPAC simply blows me away with the depth and clarity of the sound. My setup: SB3/ELPAC > digital RCA out > ethereal D4 75 ohm coax > Theta Timebase Linque Conditioner > ethereal D .5 > MSB LINKDAC > Revox preamp > Revox Agora B powered speakers (Revox system 20 years old and still sounds great!) cvj -- cvj ------------------------------------------------------------------------ cvj's Profile: http://forums.slimdevices.com/member.php?userid=2979 View this thread: http://forums.slimdevices.com/showthread.php?t=19452 _______________________________________________ audiophiles mailing list audiophiles@lists.slimdevices.com http://lists.slimdevices.com/lists/listinfo/audiophiles