SuperQ;278862 Wrote: > If I remember correctly, this failure was caused by switch packet buffer > memory corruption. Switch would get a packet, check the CRC, store it > in memory sans CRC, the bad ram in the switch would corrupt the > packets, and then send the packet out with a new CRC. > > I think the CRC removal from the packet was due to the packets coming > in with 802.1q vlan tags that needed to be removed, so the CRC had to > be re-calculated anyway.
OK - but I refuse to become paranoid over the possibility that once every ten years I might get a corrupt TCP packet to my SB :o). I worry more about being hit by gamma rays or meteors (or bits of old spacehips...actually that is a real possibility) -- Phil Leigh You want to see the signal path BEFORE it gets onto a CD/vinyl...it ain't what you'd call minimal...SB3+Stontronics PSU - Altmann JISCO/UPCI - TACT RCS 2.2X with Good Vibrations S/W - MF X-DAC V3/X-PSU/X-10 buffer (Audiocomm full mods)- Linn 5103 - Linn Aktiv 5.1 system (6x LK140's, ESPEK/TRIKAN/KATAN/SEIZMIK 10.5), Townsend Supertweeters, Kimber & Chord cables ------------------------------------------------------------------------ Phil Leigh's Profile: http://forums.slimdevices.com/member.php?userid=85 View this thread: http://forums.slimdevices.com/showthread.php?t=44532 _______________________________________________ audiophiles mailing list audiophiles@lists.slimdevices.com http://lists.slimdevices.com/lists/listinfo/audiophiles
