(I'm assuming that another source through the preamp sounds OK)
It sounds like you are overloading the input to the Preamp. The balanced input will have a larger overload margin than the unbalanced ones and so will distort less. First of all, I would open up the TP and set the internal attenuators on the unbalanced TP output to -20dB and try again. This seems odd, though. I can't find the input sensitivity specs for the preamp but modern ones shouldn't suffer from this. The TP isn't overly hot. I would also do a xilinx reset (not sure how to do this on a TP). If the problem remains, call support. -- Phil Leigh You want to see the signal path BEFORE it gets onto a CD/vinyl...it ain't what you'd call minimal... SB3 (wired) - TACT 2.2X (Linear PSU) + Good Vibrations S/W - MF Triplethreat(Audiocom full mods) - Linn 5103 - Aktiv 5.1 system (6x LK140's, ESPEK/TRIKAN/KATAN/SEIZMIK 10.5), Townsend Supertweeters, Blue Jeans Digital,Kimber Speaker & Chord Interconnect cables Outdoors: Boom ------------------------------------------------------------------------ Phil Leigh's Profile: http://forums.slimdevices.com/member.php?userid=85 View this thread: http://forums.slimdevices.com/showthread.php?t=63669 _______________________________________________ audiophiles mailing list audiophiles@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/audiophiles