PasTim;632775 Wrote: > It's an Nvidia nForce 10/100/1000 Mbps port, built-in. > > Whilst it may be that one should not have to enable flow control, if it > helps, which this does although still imperfectly, it helps. Something > is not right between the two devices, and we know I'm not entirely > alone in this. > > All device drivers are up to date with the latest from Nvidia. > > I'll try the checksum offloads when I have time.
nVidia inbuilt NIC's are known to have issues with their 1000mbps setting. You need to make sure (as Klaus said) that the NIC is set to 100mbps. Once you have rebooted the PC, you need to run everything on and off in sequence; router/switch/Touch. Everything should now be running at 100mbps (ASSUMING you have no 10mbps devices connected). -- Phil Leigh You want to see the signal path BEFORE it gets onto a CD/vinyl...it ain't what you'd call minimal... Touch(wired/XP) - Audiolense 3.3/2.0+INGUZ DRC - MF M1 DAC - Linn 5103 - full Aktiv 5.1 system (6x LK140's, ESPEK/TRIKAN/KATAN/SEIZMIK 10.5), Pekin Tuner, Townsend Supertweeters, Blue Jeans Belden Digital,Kimber 8TC Speaker & Chord Signature Plus Interconnect cables Stax4070+SRM7/II phones Kitchen Boom, Outdoors: SB Radio, Harmony One remote for everything. ------------------------------------------------------------------------ Phil Leigh's Profile: http://forums.slimdevices.com/member.php?userid=85 View this thread: http://forums.slimdevices.com/showthread.php?t=84742 _______________________________________________ audiophiles mailing list audiophiles@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/audiophiles