Jarryd, That seems to conflict with the information available from Cisco. The 867VAE and the 867VAE-W both have VAE2_A_39t_B39d_24m.SSA.bin available as a firmware option for the onboard VDSL2 modem.
Personally I run the 887VA-W-A-K9 in most customer scenarios. - Simon -- Simon Attwell Senior Systems and Network Engineer Attwell's Technical Services Pty Ltd Mobile: 0409 756 819 Email: si...@attwell.net On Tue, 9 Apr 2019 at 13:42, Jarryd Sullivan <jarryd.sulli...@area9.com.au> wrote: > Can confirm that the 867VAE-K9 in any form will not work, only the later > wireless model that was released had the ability to have the VDSL > controller firmware updated which supported vectoring. The non-wireless > models are basically pointless now. We’ve moved to C887VA’s for all our > small deployments where the 867 used to fit. > > Jarryd Sullivan > > > From: AusNOG <ausnog-boun...@lists.ausnog.net> On Behalf Of Pouya Madani > Sent: Tuesday, 9 April 2019 11:58 AM > To: ausnog@lists.ausnog.net > Subject: [AusNOG] NBN NCAS on Cisco 867VAE-K9 > > Hi, > > Has anyone had any luck with configuring a Cisco 867VAE-K9 (not the > 867VAE-W) on NBN NCAS? [VDSL handoff, and Vlan tag 100 on WAN (via AAPT)] > > I have almost tried any recommendations on AusNog, Whirpool, Cisco and > many other Communities with no luck. I understand 867VAE chipset is > different to 867VAE-W, and that 867VAE-W works just fine on NBN NCAS, but > the 867VAE-K9 has not worked for me yet. > > Has anyone got an 867VAE-K9 working on NCAS by any chance, and if so can I > have a copy of the vdsl controller and ethernet0.100 config please? > > Kind Regards, > Pedro Madani > > ________________________________ > > The information contained in this message and any attachments may be > confidential information. If you are not the intended recipient, you must > not use or forward the information contained in these documents. If you > have received this message in error, please delete the email and notify the > sender. > > Internet communications are not secure. You should scan this message and > any attachments for viruses. Under no circumstances do we accept liability > for any loss or damage which may result from your receipt of this message > or any attachments. > _______________________________________________ > AusNOG mailing list > AusNOG@lists.ausnog.net > http://lists.ausnog.net/mailman/listinfo/ausnog >
_______________________________________________ AusNOG mailing list AusNOG@lists.ausnog.net http://lists.ausnog.net/mailman/listinfo/ausnog