Hi All, I received my AVRISP mkII yesterday (finally), and I am trying to get it set up on my Mac with AVRDUDE. I had been using 5.0, however I realized that the programmer-id avrisp2 was not recognized. I then installed 5.1 which had avrisp2 listed in avrdude.conf, but still no luck accessing the usb. I have tried -P usb, and -P USB, but all I get is:
avrdude: ser_open(): can't open device "usb": No such file or directory I read somewhere that libusb is needed, so I tried that as well. But then while installing 0.1.11, I received the error: darwin.c:70:2: error: #warning "libusb being compiled for 10.3 or later" make[1]: *** [darwin.lo] Error 1 make: *** [install-recursive] Error 1 I am running OSX Tiger, so I guess it is not supported? However, I did get 0.1.10a to install successfully. I then tried to rebuild and install avrdude 5.1, but still no luck with the mkII. Has anyone been successful in using any Atmel USB programmers with avrdude in a linux/Mac OSX environment? Am I using the -P port option correctly with the usb? I have seen that the JTAGICE mkII is supported in avrdude. Is accessing the usb similar to that? It would be great to get setup with my mkII on my Mac, and not have to carry around the bigger clunky STK500. Any suggestions would be greatly appreciated!! -Chris _______________________________________________ AVR-chat mailing list [email protected] http://lists.nongnu.org/mailman/listinfo/avr-chat
