On Thu, Aug 20, 2009 at 7:58 PM, Weddington, Eric <[email protected] > wrote:
> > > > -----Original Message----- > > From: [email protected] > > [mailto:avr-chat-bounces+eric.weddington<avr-chat-bounces%2Beric.weddington> > [email protected]] > > On Behalf Of Irving Ruan > > Sent: Thursday, August 20, 2009 8:51 PM > > To: [email protected] > > Subject: [avr-chat] timeout error on STK500 > > > > After getting some things set up, I wrote some test code and > > assembled it to Intel Hex so I could write it to flash on my > > STK500. Unfortunately, I've been receiving these > > ReceiveMessage() timeout errors and did some research online > > but I honestly think the USB/RS-232 adapter is the culprit > > (from what I've heard, it doesn't work too well with AVRDUDE). > > > > This is what I'm typing to verify that my STK500 is > > interfaced correctly: avrdude \-c stk500v2 \-p m324p \-P > > /dev/ttyUSB1 and this is what I receive: > > Are you actually typing the backslashes (above) on the command line? > No. I was also thinking if I should specify the baudrate in the verification, such as 115200.. -- Irving Y. Ruan [email protected]
_______________________________________________ AVR-chat mailing list [email protected] http://lists.nongnu.org/mailman/listinfo/avr-chat
